[PATCH v3 08/17] arm64: dts: mediatek: add mmc support for mt8365 SoC

[Matthias Brugger]

On 29/03/2023 15:21, AngeloGioacchino Del Regno wrote:
> Il 29/03/23 10:54, Alexandre Mergnat ha scritto:
>> There are three ports of MSDC (MMC and SD Controller), which are:
>> - MSDC0: EMMC5.1
>> - MSDC1: SD3.0/SDIO3.0
>> - MSDC2: SDIO3.0+
>>
>> Signed-off-by: Alexandre Mergnat <amergnat at baylibre.com>
>> ---
>>   arch/arm64/boot/dts/mediatek/mt8365.dtsi | 39 ++++++++++++++++++++++++++++++++
>>   1 file changed, 39 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi 
>> b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
>> index 687011353f69..a67eeca28da5 100644
>> --- a/arch/arm64/boot/dts/mediatek/mt8365.dtsi
>> +++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
>> @@ -399,6 +399,45 @@ usb_host: usb at 11200000 {
>>               };
>>           };
>> +        mmc0: mmc at 11230000 {
>> +            compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc";
>> +            reg = <0 0x11230000 0 0x1000>,
>> +                  <0 0x11cd0000 0 0x1000>;
>> +            interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_LOW>;
>> +            clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>,
>> +                 <&infracfg CLK_IFR_MSDC0_HCLK>,
>> +                 <&infracfg CLK_IFR_MSDC0_SRC>;
>> +            clock-names = "source", "hclk", "source_cg";
>> +            status = "disabled";
>> +        };
>> +
>> +        mmc1: mmc at 11240000 {
>> +            compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc";
>> +            reg = <0 0x11240000 0 0x1000>,
>> +                  <0 0x11c90000 0 0x1000>;
>> +            interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_LOW>;
>> +            clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>,
>> +                 <&infracfg CLK_IFR_MSDC1_HCLK>,
>> +                 <&infracfg CLK_IFR_MSDC1_SRC>;
>> +            clock-names = "source", "hclk", "source_cg";
>> +            status = "disabled";
>> +        };
>> +
>> +        mmc2: mmc at 11250000 {
>> +            compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc";
>> +            reg = <0 0x11250000 0 0x1000>,
>> +                  <0 0x11c60000 0 0x1000>;
>> +            interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_LOW>;
>> +            clocks = <&topckgen CLK_TOP_MSDC50_2_SEL>,
>> +                 <&infracfg CLK_IFR_MSDC2_HCLK>,
>> +                 <&infracfg CLK_IFR_MSDC2_SRC>,
>> +                 <&infracfg CLK_IFR_MSDC2_BK>,
>> +                 <&infracfg CLK_IFR_AP_MSDC0>;
>> +            clock-names = "source", "hclk", "source_cg",
>> +                      "bus_clk", "sys_cg";
> 
> clock-names for this do fit in one 90 columns line.
> 
> After compressing it,
> 
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
> 

I applied the patch and dropped you Reviewed-by tag. I think it depends on the 
taste of everybody how you prefer to structure this. I've also seen that on 
boards you care (mt8183 in that case) there a clocks that don't adhere to the 
criteria you mention here ;-)

Anyway many thanks for reviewing this and all the great work in general. 
Honestly I feel I didn't made justice by dropping your tag, but as you stated so 
explicitly... :)

Regards,
Matthias