[PATCH v10 0/3] arm64: ti: Enable audio on AM62
Jai Luthra
j-luthra at ti.com
Thu Mar 30 02:44:04 PDT 2023
This patch series adds support for audio via headphone jack on SK-AM62
(E2+) and SK-AM62-LP boards. The jack is wired to TLV320AIC3106 (codec),
which is connected to McASP1 (serializer) on the SoC.
The TRRS 3.5mm jack can be used for simultaneous playback and recording.
Signed-off-by: Jai Luthra <j-luthra at ti.com>
---
Changes in v10:
- Drop AM62A patches [4-6/6]
- Fix defconfig to match output of savedefconfig, and move it to the end
of the series
- Reword commit messages
- Link to v9: https://lore.kernel.org/r/20230313-mcasp_upstream-v9-0-6d937efe4ec4@ti.com
Below is the range-diff from v9:
1: 05c92990b854 < -: ------------ arm64: defconfig: Enable audio drivers for TI K3 SoCs
2: 962c58a419d5 = 1: 0bbee413da91 arm64: dts: ti: k3-am62-main: Add McASP nodes
3: b0e710c14878 ! 2: f624443bacf1 arm64: dts: ti: k3-am625-sk: Enable audio on AM62 SK
@@ Metadata
Author: Jai Luthra <j-luthra at ti.com>
## Commit message ##
- arm64: dts: ti: k3-am625-sk: Enable audio on AM62 SK
+ arm64: dts: ti: Enable audio on SK-AM62(-LP)
Add nodes for audio codec and sound card, enable the audio serializer
(McASP1) under use from SK-AM62 E2 [1] onwards and update pinmux.
Keep all audio related nodes in the common dtsi as they are exactly the
- same between SK-AM62 and SK-AM62-LP.
+ same between SK-AM62 and SK-AM62-LP [2].
Link: https://www.ti.com/lit/zip/sprr448 [1]
+ Link: https://www.ti.com/lit/zip/sprr471 [2]
Signed-off-by: Jai Luthra <j-luthra at ti.com>
Reviewed-by: Jayesh Choudhary <j-choudhary at ti.com>
4: 42ebd41e357f < -: ------------ arm64: dts: ti: k3-am62a-main: Add nodes for McASP
5: 3ad21f2419fc < -: ------------ arm64: dts: ti: k3-am62a7-sk: Split vcc_3v3 regulators
6: edd909d78e67 < -: ------------ arm64: dts: ti: k3-am62a7-sk: Enable audio on AM62A
-: ------------ > 3: 4d3ec922758a arm64: defconfig: Enable audio drivers for SK-AM62
---
Jai Luthra (2):
arm64: dts: ti: Enable audio on SK-AM62(-LP)
arm64: defconfig: Enable audio drivers for SK-AM62
Jayesh Choudhary (1):
arm64: dts: ti: k3-am62-main: Add McASP nodes
arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts | 4 ++
arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 60 ++++++++++++++++++++
arch/arm64/boot/dts/ti/k3-am625-sk.dts | 15 +++++
arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 76 ++++++++++++++++++++++++++
arch/arm64/configs/defconfig | 2 +
5 files changed, 157 insertions(+)
---
base-commit: f3910d4b06af57669b77c0afe829deca6d5a3ed2
change-id: 20230313-mcasp_upstream-0e137013059b
Best regards,
--
Jai Luthra <j-luthra at ti.com>
More information about the linux-arm-kernel
mailing list