[PATCH] clocksource/drivers/timer-mediatek: Split out CPUXGPT timers
Walter Chang (張維哲)
Walter.Chang at mediatek.com
Wed Mar 29 22:37:48 PDT 2023
On Thu, 2023-03-09 at 11:39 +0100, AngeloGioacchino Del Regno wrote:
> On MediaTek platforms, CPUXGPT is the source for the AArch64 System
> Timer, read through CNTVCT_EL0.
>
> The handling for starting this timer ASAP was introduced in commit
> 327e93cf9a59 ("clocksource/drivers/timer-mediatek: Implement CPUXGPT
> timers")
> which description also contains an important full explanation of the
> reasons why this driver is necessary and cannot be a module.
>
> In preparation for an eventual conversion of timer-mediatek to a
> platform_driver that would be possibly built as a module, split out
> the CPUXGPT timers driver to a new timer-mediatek-cpux.c driver.
>
> This commit brings no functional changes.
>
> Signed-off-by: AngeloGioacchino Del Regno <
> angelogioacchino.delregno at collabora.com>
> ---
>
> Note: I've added a mention to the commit that is introducing CPUXGPT
> because it contains a broad explanation about why this is needed and
> why it is mandatory to have it as built-in and initialized as early
> as possible. This is mostly because this question was asked multiple
> times and I've been pointing people to that commit to explain it all.
>
> This commit was made because of a discussion about the impossibility
> to convert timer-mediatek to a module: even though that's definitely
> not easy at all, this will make sure that whatever cannot (ever) be
> built as module goes out of that driver.
>
> I tried to tackle a timer-mediatek conversion to platform_driver as
> well, but I don't currently have the required bandwidth to do so:
> as a first step I moved that, so I'm pushing this commit as to try
> to reduce duplicated work.
>
> This commit was tested on MT6795 Sony Xperia M5.
>
> drivers/clocksource/Kconfig | 9 ++
> drivers/clocksource/Makefile | 1 +
> drivers/clocksource/timer-mediatek-cpux.c | 140
> ++++++++++++++++++++++
> drivers/clocksource/timer-mediatek.c | 114 ------------------
> 4 files changed, 150 insertions(+), 114 deletions(-)
> create mode 100644 drivers/clocksource/timer-mediatek-cpux.c
>
> diff --git a/drivers/clocksource/Kconfig
> b/drivers/clocksource/Kconfig
> index 5fc8f0e7fb38..526382dc7482 100644
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -479,6 +479,15 @@ config MTK_TIMER
> help
> Support for Mediatek timer driver.
>
> +config MTK_CPUX_TIMER
> + bool "MediaTek CPUX timer driver" if COMPILE_TEST
> + depends on HAS_IOMEM
> + default ARCH_MEDIATEK
> + select TIMER_OF
> + select CLKSRC_MMIO
> + help
> + Support for MediaTek CPUXGPT timer driver.
> +
> config SPRD_TIMER
> bool "Spreadtrum timer driver" if EXPERT
> depends on HAS_IOMEM
> diff --git a/drivers/clocksource/Makefile
> b/drivers/clocksource/Makefile
> index 64ab547de97b..f12d3987a960 100644
> --- a/drivers/clocksource/Makefile
> +++ b/drivers/clocksource/Makefile
> @@ -51,6 +51,7 @@ obj-$(CONFIG_FSL_FTM_TIMER) += timer-fsl-ftm.o
> obj-$(CONFIG_VF_PIT_TIMER) += timer-vf-pit.o
> obj-$(CONFIG_CLKSRC_QCOM) += timer-qcom.o
> obj-$(CONFIG_MTK_TIMER) += timer-mediatek.o
> +obj-$(CONFIG_MTK_CPUX_TIMER) += timer-mediatek-cpux.o
> obj-$(CONFIG_CLKSRC_PISTACHIO) += timer-pistachio.o
> obj-$(CONFIG_CLKSRC_TI_32K) += timer-ti-32k.o
> obj-$(CONFIG_OXNAS_RPS_TIMER) += timer-oxnas-rps.o
> diff --git a/drivers/clocksource/timer-mediatek-cpux.c
> b/drivers/clocksource/timer-mediatek-cpux.c
> new file mode 100644
> index 000000000000..a8e3df4c09fd
> --- /dev/null
> +++ b/drivers/clocksource/timer-mediatek-cpux.c
> @@ -0,0 +1,140 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * MediaTek SoCs CPUX General Purpose Timer handling
> + *
> + * Based on timer-mediatek.c:
> + * Copyright (C) 2014 Matthias Brugger <matthias.bgg at gmail.com>
> + *
> + * Copyright (C) 2022 Collabora Ltd.
> + * AngeloGioacchino Del Regno <
> angelogioacchino.delregno at collabora.com>
> + */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> +#include <linux/clockchips.h>
> +#include <linux/clocksource.h>
> +#include <linux/interrupt.h>
> +#include <linux/irqreturn.h>
> +#include <linux/sched_clock.h>
> +#include <linux/slab.h>
> +#include "timer-of.h"
> +
> +#define TIMER_SYNC_TICKS 3
> +
> +/* cpux mcusys wrapper */
> +#define CPUX_CON_REG 0x0
> +#define CPUX_IDX_REG 0x4
> +
> +/* cpux */
> +#define CPUX_IDX_GLOBAL_CTRL 0x0
> + #define CPUX_ENABLE BIT(0)
> + #define CPUX_CLK_DIV_MASK GENMASK(10, 8)
> + #define CPUX_CLK_DIV1 BIT(8)
> + #define CPUX_CLK_DIV2 BIT(9)
> + #define CPUX_CLK_DIV4 BIT(10)
> +#define CPUX_IDX_GLOBAL_IRQ 0x30
> +
> +static u32 mtk_cpux_readl(u32 reg_idx, struct timer_of *to)
> +{
> + writel(reg_idx, timer_of_base(to) + CPUX_IDX_REG);
> + return readl(timer_of_base(to) + CPUX_CON_REG);
> +}
> +
> +static void mtk_cpux_writel(u32 val, u32 reg_idx, struct timer_of
> *to)
> +{
> + writel(reg_idx, timer_of_base(to) + CPUX_IDX_REG);
> + writel(val, timer_of_base(to) + CPUX_CON_REG);
> +}
> +
> +static void mtk_cpux_set_irq(struct timer_of *to, bool enable)
> +{
> + const unsigned long *irq_mask =
> cpumask_bits(cpu_possible_mask);
> + u32 val;
> +
> + val = mtk_cpux_readl(CPUX_IDX_GLOBAL_IRQ, to);
> +
> + if (enable)
> + val |= *irq_mask;
> + else
> + val &= ~(*irq_mask);
> +
> + mtk_cpux_writel(val, CPUX_IDX_GLOBAL_IRQ, to);
> +}
> +
> +static int mtk_cpux_clkevt_shutdown(struct clock_event_device
> *clkevt)
> +{
> + /* Clear any irq */
> + mtk_cpux_set_irq(to_timer_of(clkevt), false);
> +
> + /*
> + * Disabling CPUXGPT timer will crash the platform, especially
> + * if Trusted Firmware is using it (usually, for sleep states),
> + * so we only mask the IRQ and call it a day.
> + */
> + return 0;
> +}
> +
> +static int mtk_cpux_clkevt_resume(struct clock_event_device *clkevt)
> +{
> + mtk_cpux_set_irq(to_timer_of(clkevt), true);
> + return 0;
> +}
> +
> +static struct timer_of to = {
> + /*
> + * There are per-cpu interrupts for the CPUX General Purpose
> Timer
> + * but since this timer feeds the AArch64 System Timer we can
> rely
> + * on the CPU timer PPIs as well, so we don't declare
> TIMER_OF_IRQ.
> + */
> + .flags = TIMER_OF_BASE | TIMER_OF_CLOCK,
> +
> + .clkevt = {
> + .name = "mtk-cpuxgpt",
> + .cpumask = cpu_possible_mask,
> + .rating = 10,
> + .set_state_shutdown = mtk_cpux_clkevt_shutdown,
> + .tick_resume = mtk_cpux_clkevt_resume,
> + },
> +};
> +
> +static int __init mtk_cpux_init(struct device_node *node)
> +{
> + u32 freq, val;
> + int ret;
> +
> + /* If this fails, bad things are about to happen... */
> + ret = timer_of_init(node, &to);
> + if (ret) {
> + WARN(1, "Cannot start CPUX timers.\n");
> + return ret;
> + }
> +
> + /*
> + * Check if we're given a clock with the right frequency for
> this
> + * timer, otherwise warn but keep going with the setup anyway,
> as
> + * that makes it possible to still boot the kernel, even though
> + * it may not work correctly (random lockups, etc).
> + * The reason behind this is that having an early UART may not
> be
> + * possible for everyone and this gives a chance to retrieve
> kmsg
> + * for eventual debugging even on consumer devices.
> + */
> + freq = timer_of_rate(&to);
> + if (freq > 13000000)
> + WARN(1, "Requested unsupported timer frequency %u\n",
> freq);
> +
> + /* Clock input is 26MHz, set DIV2 to achieve 13MHz clock */
> + val = mtk_cpux_readl(CPUX_IDX_GLOBAL_CTRL, &to);
> + val &= ~CPUX_CLK_DIV_MASK;
> + val |= CPUX_CLK_DIV2;
> + mtk_cpux_writel(val, CPUX_IDX_GLOBAL_CTRL, &to);
> +
> + /* Enable all CPUXGPT timers */
> + val = mtk_cpux_readl(CPUX_IDX_GLOBAL_CTRL, &to);
> + mtk_cpux_writel(val | CPUX_ENABLE, CPUX_IDX_GLOBAL_CTRL, &to);
> +
> + clockevents_config_and_register(&to.clkevt, timer_of_rate(&to),
> + TIMER_SYNC_TICKS, 0xffffffff);
> +
> + return 0;
> +}
> +TIMER_OF_DECLARE(mtk_mt6795, "mediatek,mt6795-systimer",
> mtk_cpux_init);
> diff --git a/drivers/clocksource/timer-mediatek.c
> b/drivers/clocksource/timer-mediatek.c
> index d5b29fd03ca2..7bcb4a3f26fb 100644
> --- a/drivers/clocksource/timer-mediatek.c
> +++ b/drivers/clocksource/timer-mediatek.c
> @@ -22,19 +22,6 @@
>
> #define TIMER_SYNC_TICKS (3)
>
> -/* cpux mcusys wrapper */
> -#define CPUX_CON_REG 0x0
> -#define CPUX_IDX_REG 0x4
> -
> -/* cpux */
> -#define CPUX_IDX_GLOBAL_CTRL 0x0
> - #define CPUX_ENABLE BIT(0)
> - #define CPUX_CLK_DIV_MASK GENMASK(10, 8)
> - #define CPUX_CLK_DIV1 BIT(8)
> - #define CPUX_CLK_DIV2 BIT(9)
> - #define CPUX_CLK_DIV4 BIT(10)
> -#define CPUX_IDX_GLOBAL_IRQ 0x30
> -
> /* gpt */
> #define GPT_IRQ_EN_REG 0x00
> #define GPT_IRQ_ENABLE(val) BIT((val) - 1)
> @@ -85,52 +72,6 @@
>
> static void __iomem *gpt_sched_reg __read_mostly;
>
> -static u32 mtk_cpux_readl(u32 reg_idx, struct timer_of *to)
> -{
> - writel(reg_idx, timer_of_base(to) + CPUX_IDX_REG);
> - return readl(timer_of_base(to) + CPUX_CON_REG);
> -}
> -
> -static void mtk_cpux_writel(u32 val, u32 reg_idx, struct timer_of
> *to)
> -{
> - writel(reg_idx, timer_of_base(to) + CPUX_IDX_REG);
> - writel(val, timer_of_base(to) + CPUX_CON_REG);
> -}
> -
> -static void mtk_cpux_set_irq(struct timer_of *to, bool enable)
> -{
> - const unsigned long *irq_mask =
> cpumask_bits(cpu_possible_mask);
> - u32 val;
> -
> - val = mtk_cpux_readl(CPUX_IDX_GLOBAL_IRQ, to);
> -
> - if (enable)
> - val |= *irq_mask;
> - else
> - val &= ~(*irq_mask);
> -
> - mtk_cpux_writel(val, CPUX_IDX_GLOBAL_IRQ, to);
> -}
> -
> -static int mtk_cpux_clkevt_shutdown(struct clock_event_device
> *clkevt)
> -{
> - /* Clear any irq */
> - mtk_cpux_set_irq(to_timer_of(clkevt), false);
> -
> - /*
> - * Disabling CPUXGPT timer will crash the platform, especially
> - * if Trusted Firmware is using it (usually, for sleep states),
> - * so we only mask the IRQ and call it a day.
> - */
> - return 0;
> -}
> -
> -static int mtk_cpux_clkevt_resume(struct clock_event_device *clkevt)
> -{
> - mtk_cpux_set_irq(to_timer_of(clkevt), true);
> - return 0;
> -}
> -
> static void mtk_syst_ack_irq(struct timer_of *to)
> {
> /* Clear and disable interrupt */
> @@ -340,60 +281,6 @@ static struct timer_of to = {
> },
> };
>
> -static int __init mtk_cpux_init(struct device_node *node)
> -{
> - static struct timer_of to_cpux;
> - u32 freq, val;
> - int ret;
> -
> - /*
> - * There are per-cpu interrupts for the CPUX General Purpose
> Timer
> - * but since this timer feeds the AArch64 System Timer we can
> rely
> - * on the CPU timer PPIs as well, so we don't declare
> TIMER_OF_IRQ.
> - */
> - to_cpux.flags = TIMER_OF_BASE | TIMER_OF_CLOCK;
> - to_cpux.clkevt.name = "mtk-cpuxgpt";
> - to_cpux.clkevt.rating = 10;
> - to_cpux.clkevt.cpumask = cpu_possible_mask;
> - to_cpux.clkevt.set_state_shutdown = mtk_cpux_clkevt_shutdown;
> - to_cpux.clkevt.tick_resume = mtk_cpux_clkevt_resume;
> -
> - /* If this fails, bad things are about to happen... */
> - ret = timer_of_init(node, &to_cpux);
> - if (ret) {
> - WARN(1, "Cannot start CPUX timers.\n");
> - return ret;
> - }
> -
> - /*
> - * Check if we're given a clock with the right frequency for
> this
> - * timer, otherwise warn but keep going with the setup anyway,
> as
> - * that makes it possible to still boot the kernel, even though
> - * it may not work correctly (random lockups, etc).
> - * The reason behind this is that having an early UART may not
> be
> - * possible for everyone and this gives a chance to retrieve
> kmsg
> - * for eventual debugging even on consumer devices.
> - */
> - freq = timer_of_rate(&to_cpux);
> - if (freq > 13000000)
> - WARN(1, "Requested unsupported timer frequency %u\n",
> freq);
> -
> - /* Clock input is 26MHz, set DIV2 to achieve 13MHz clock */
> - val = mtk_cpux_readl(CPUX_IDX_GLOBAL_CTRL, &to_cpux);
> - val &= ~CPUX_CLK_DIV_MASK;
> - val |= CPUX_CLK_DIV2;
> - mtk_cpux_writel(val, CPUX_IDX_GLOBAL_CTRL, &to_cpux);
> -
> - /* Enable all CPUXGPT timers */
> - val = mtk_cpux_readl(CPUX_IDX_GLOBAL_CTRL, &to_cpux);
> - mtk_cpux_writel(val | CPUX_ENABLE, CPUX_IDX_GLOBAL_CTRL,
> &to_cpux);
> -
> - clockevents_config_and_register(&to_cpux.clkevt,
> timer_of_rate(&to_cpux),
> - TIMER_SYNC_TICKS, 0xffffffff);
> -
> - return 0;
> -}
> -
> static int __init mtk_syst_init(struct device_node *node)
> {
> int ret;
> @@ -452,4 +339,3 @@ static int __init mtk_gpt_init(struct device_node
> *node)
> }
> TIMER_OF_DECLARE(mtk_mt6577, "mediatek,mt6577-timer", mtk_gpt_init);
> TIMER_OF_DECLARE(mtk_mt6765, "mediatek,mt6765-timer",
> mtk_syst_init);
> -TIMER_OF_DECLARE(mtk_mt6795, "mediatek,mt6795-systimer",
> mtk_cpux_init);
Reviewed-by: Walter Chang <walter.chang at mediatek.com>
More information about the linux-arm-kernel
mailing list