[PATCH] dt-bindings: remoteproc: Drop unneeded quotes

Wed Mar 29 10:21:06 PDT 2023

On Mon, Mar 27, 2023 at 12:01:13PM -0500, Rob Herring wrote:
> Cleanup bindings dropping unneeded quotes. Once all these are fixed,
> checking for this can be enabled in yamllint.
> 
> Signed-off-by: Rob Herring <robh at kernel.org>
> ---
>  .../remoteproc/amlogic,meson-mx-ao-arc.yaml        |  4 ++--
>  .../bindings/remoteproc/fsl,imx-rproc.yaml         |  4 ++--
>  .../bindings/remoteproc/ingenic,vpu.yaml           |  4 ++--
>  .../bindings/remoteproc/qcom,glink-edge.yaml       |  2 +-
>  .../bindings/remoteproc/qcom,smd-edge.yaml         |  2 +-
>  .../bindings/remoteproc/renesas,rcar-rproc.yaml    |  4 ++--
>  .../bindings/remoteproc/st,stm32-rproc.yaml        | 14 +++++++-------
>  7 files changed, 17 insertions(+), 17 deletions(-)
>

Reviewed-by: Mathieu Poirier <mathieu.poirier at linaro.org>

> diff --git a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
> index 11cb42a3fdd1..3100cb870170 100644
> --- a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
> @@ -1,8 +1,8 @@
>  # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>  %YAML 1.2
>  ---
> -$id: "http://devicetree.org/schemas/remoteproc/amlogic,meson-mx-ao-arc.yaml#"
> -$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +$id: http://devicetree.org/schemas/remoteproc/amlogic,meson-mx-ao-arc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>  
>  title: Amlogic Meson AO ARC Remote Processor
>  
> diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
> index ae2eab4452dd..0c3910f152d1 100644
> --- a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
> @@ -1,8 +1,8 @@
>  # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>  %YAML 1.2
>  ---
> -$id: "http://devicetree.org/schemas/remoteproc/fsl,imx-rproc.yaml#"
> -$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +$id: http://devicetree.org/schemas/remoteproc/fsl,imx-rproc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>  
>  title: NXP i.MX Co-Processor
>  
> diff --git a/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml b/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml
> index 85b1e43cab08..8b55dbd909b0 100644
> --- a/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml
> @@ -1,8 +1,8 @@
>  # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>  %YAML 1.2
>  ---
> -$id: "http://devicetree.org/schemas/remoteproc/ingenic,vpu.yaml#"
> -$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +$id: http://devicetree.org/schemas/remoteproc/ingenic,vpu.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>  
>  title: Ingenic Video Processing Unit
>  
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
> index 15e6851e1ff8..7b43ad3daa56 100644
> --- a/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
> @@ -15,7 +15,7 @@ description:
>  
>  properties:
>    $nodename:
> -    const: "glink-edge"
> +    const: glink-edge
>  
>    apr:
>      $ref: /schemas/soc/qcom/qcom,apr.yaml#
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml
> index 7ec8a6b6682c..02c85b420c1a 100644
> --- a/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml
> @@ -21,7 +21,7 @@ description:
>  
>  properties:
>    $nodename:
> -    const: "smd-edge"
> +    const: smd-edge
>  
>    apr:
>      $ref: /schemas/soc/qcom/qcom,apr.yaml#
> diff --git a/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml
> index 7e0275d31a3c..4bea679a0f61 100644
> --- a/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml
> @@ -1,8 +1,8 @@
>  # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>  %YAML 1.2
>  ---
> -$id: "http://devicetree.org/schemas/remoteproc/renesas,rcar-rproc.yaml#"
> -$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +$id: http://devicetree.org/schemas/remoteproc/renesas,rcar-rproc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>  
>  title: Renesas R-Car remote processor controller
>  
> diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
> index 66b1e3efdaa3..37c0d7b4ceef 100644
> --- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
> @@ -1,8 +1,8 @@
>  # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>  %YAML 1.2
>  ---
> -$id: "http://devicetree.org/schemas/remoteproc/st,stm32-rproc.yaml#"
> -$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +$id: http://devicetree.org/schemas/remoteproc/st,stm32-rproc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>  
>  title: STMicroelectronics STM32 remote processor controller
>  
> @@ -29,7 +29,7 @@ properties:
>  
>    st,syscfg-holdboot:
>      description: remote processor reset hold boot
> -    $ref: "/schemas/types.yaml#/definitions/phandle-array"
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
>      items:
>        - items:
>            - description: Phandle of syscon block
> @@ -39,7 +39,7 @@ properties:
>    st,syscfg-tz:
>      description:
>        Reference to the system configuration which holds the RCC trust zone mode
> -    $ref: "/schemas/types.yaml#/definitions/phandle-array"
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
>      items:
>        - items:
>            - description: Phandle of syscon block
> @@ -95,7 +95,7 @@ properties:
>        (see ../reserved-memory/reserved-memory.txt)
>  
>    st,syscfg-pdds:
> -    $ref: "/schemas/types.yaml#/definitions/phandle-array"
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
>      description: |
>        Reference to the system configuration which holds the remote
>      items:
> @@ -105,7 +105,7 @@ properties:
>            - description: The field mask of the PDDS selection
>  
>    st,syscfg-m4-state:
> -    $ref: "/schemas/types.yaml#/definitions/phandle-array"
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
>      description: |
>        Reference to the tamp register which exposes the Cortex-M4 state.
>      items:
> @@ -115,7 +115,7 @@ properties:
>            - description: The field mask of the Cortex-M4 state
>  
>    st,syscfg-rsc-tbl:
> -    $ref: "/schemas/types.yaml#/definitions/phandle-array"
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
>      description: |
>        Reference to the tamp register which references the Cortex-M4
>        resource table address.
> -- 
> 2.39.2
>