[PATCH 2/2] arm64: dts: ti: k3-j7200-main: Switch MAIN R5F cluster to Split-mode

[Apurva Nandan]

From: Suman Anna <s-anna at ti.com>

J7200 SoCs has a R5F cluster in each of the MAIN and MCU domains, and both
of these are configured for LockStep mode at the moment. Switch the MAIN
R5F cluster to Split mode by default to maximize the number of R5F cores.
The MCU R5F cluster continues to be in the preferred LockStep mode.

Note that this configuration is the default for remoteproc mode (kernel
driver boots the R5F processors). These will be overridden for early-booted
remoteprocs through the corresponding IPC-only support in the K3 R5F
remoteproc driver.

Signed-off-by: Suman Anna <s-anna at ti.com>
Signed-off-by: Apurva Nandan <a-nandan at ti.com>
---
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 138381f43ce4..573a7f949b1d 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -797,7 +797,7 @@ watchdog1: watchdog at 2210000 {
 
 	main_r5fss0: r5fss at 5c00000 {
 		compatible = "ti,j7200-r5fss";
-		ti,cluster-mode = <1>;
+		ti,cluster-mode = <0>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
-- 
2.34.1