[PATCH v8 3/6] arm64: dts: ti: k3-am625-sk: Enable audio on AM62 SK

[Nishanth Menon]

On 18:59-20230328, Jai Luthra wrote:
> Add nodes for audio codec and sound card, enable the audio serializer
> (McASP1) under use from SK-AM62 E2 [1] onwards and update pinmux.
> 
> Keep all audio related nodes in the common dtsi as they are exactly the
> same between SK-AM62 and SK-AM62-LP.
> 
> Link: https://www.ti.com/lit/zip/sprr448 [1]
> Signed-off-by: Jai Luthra <j-luthra at ti.com>
> Reviewed-by: Jayesh Choudhary <j-choudhary at ti.com>
> ---
>  arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts       | 11 ++++
>  arch/arm64/boot/dts/ti/k3-am625-sk.dts         | 11 ++++
>  arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 77 ++++++++++++++++++++++++++
>  3 files changed, 99 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
> index b2ca19e3042e..5ed6b1abe87d 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
> @@ -70,6 +70,17 @@ vddshv_sdio: regulator-4 {
>  		states = <1800000 0x0>,
>  			 <3300000 0x1>;
>  	};
> +
> +	vcc_1v8: regulator-5 {
> +		/* output of TPS62824DMQ */
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc_1v8";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		vin-supply = <&vcc_3v3_sys>;
> +		regulator-always-on;
> +		regulator-boot-on;
> +	};
>  };
>  
>  &main_pmx0 {
> diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
> index cdc0858dd1b2..2b861681e548 100644
> --- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
> @@ -87,6 +87,17 @@ vdd_sd_dv: regulator-4 {
>  		states = <1800000 0x0>,
>  			 <3300000 0x1>;
>  	};
> +
> +	vcc_1v8: regulator-5 {
> +		/* output of TPS6282518DMQ */
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc_1v8";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		vin-supply = <&vcc_3v3_sys>;
> +		regulator-always-on;
> +		regulator-boot-on;
> +	};
>  };

If the regulators are common, maybe we should first move the regulators
to common dtsi?

>  
>  &main_pmx0 {
> diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
> index 54318a07d50c..2500cb9ba323 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
> @@ -81,6 +81,41 @@ led-0 {
>  			default-state = "off";
>  		};
>  	};
> +
> +	tlv320_mclk: clk-0 {
> +		#clock-cells = <0>;
> +		compatible = "fixed-clock";
> +		clock-frequency = <12288000>;
> +	};
> +
> +	codec_audio: sound {
> +		compatible = "simple-audio-card";
> +		simple-audio-card,name = "AM62x-SKEVM";
> +		simple-audio-card,widgets =
> +			"Headphone",	"Headphone Jack",
> +			"Line",		"Line In",
> +			"Microphone",	"Microphone Jack";
> +		simple-audio-card,routing =
> +			"Headphone Jack",	"HPLOUT",
> +			"Headphone Jack",	"HPROUT",
> +			"LINE1L",		"Line In",
> +			"LINE1R",		"Line In",
> +			"MIC3R",		"Microphone Jack",
> +			"Microphone Jack",	"Mic Bias";
> +		simple-audio-card,format = "dsp_b";
> +		simple-audio-card,bitclock-master = <&sound_master>;
> +		simple-audio-card,frame-master = <&sound_master>;
> +		simple-audio-card,bitclock-inversion;
> +
> +		simple-audio-card,cpu {
> +			sound-dai = <&mcasp1>;
> +		};
> +
> +		sound_master: simple-audio-card,codec {
> +			sound-dai = <&tlv320aic3106>;
> +			clocks = <&tlv320_mclk>;
> +		};
> +	};
>  };
>  
>  &main_pmx0 {
> @@ -175,6 +210,15 @@ main_usb1_pins_default: main-usb1-pins-default {
>  			AM62X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18/E16) USB1_DRVVBUS */
>  		>;
>  	};
> +
> +	main_mcasp1_pins_default: main-mcasp1-pins-default {
> +		pinctrl-single,pins = <
> +			AM62X_IOPAD(0x090, PIN_INPUT, 2) /* (M24) GPMC0_BE0N_CLE.MCASP1_ACLKX */
> +			AM62X_IOPAD(0x098, PIN_INPUT, 2) /* (U23) GPMC0_WAIT0.MCASP1_AFSX */
> +			AM62X_IOPAD(0x08c, PIN_OUTPUT, 2) /* (L25) GPMC0_WEN.MCASP1_AXR0 */
> +			AM62X_IOPAD(0x084, PIN_INPUT, 2) /* (L23) GPMC0_ADVN_ALE.MCASP1_AXR2 */
> +		>;
> +	};
>  };
>  
>  &wkup_uart0 {
> @@ -205,6 +249,19 @@ &main_i2c1 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&main_i2c1_pins_default>;
>  	clock-frequency = <400000>;
> +
> +	tlv320aic3106: audio-codec at 1b {
> +		#sound-dai-cells = <0>;
> +		compatible = "ti,tlv320aic3106";
> +		reg = <0x1b>;
> +		ai3x-micbias-vg = <1>;	/* 2.0V */
> +
> +		/* Regulators */
> +		AVDD-supply = <&vcc_3v3_sys>;
> +		IOVDD-supply = <&vcc_3v3_sys>;
> +		DRVDD-supply = <&vcc_3v3_sys>;
> +		DVDD-supply = <&vcc_1v8>;
> +	};
>  };
>  
>  &sdhci0 {
> @@ -272,3 +329,23 @@ &usb1 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&main_usb1_pins_default>;
>  };
> +
> +&mcasp1 {
> +	status = "okay";
> +	#sound-dai-cells = <0>;
> +
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&main_mcasp1_pins_default>;
> +
> +	op-mode = <0>;          /* MCASP_IIS_MODE */
> +	tdm-slots = <2>;
> +
> +	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
> +	       1 0 2 0
> +	       0 0 0 0
> +	       0 0 0 0
> +	       0 0 0 0
> +	>;
> +	tx-num-evt = <32>;
> +	rx-num-evt = <32>;
> +};
> 
> -- 
> 2.40.0
> 

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D