[PATCH v6 00/10] ARM: stm32: add support for Phycore STM32MP1

[Steffen Trumtrar]

Hi,

this is the fifth installement of my series for adding support for the
Phytec STM32MP1-based SoM and board.

Phytec itself calls the board "Phycore STM32MP1-3" and has other
endnumbers. I only have access to the "-3" and that's what this series
adds.

    Changes since v5:
      - add reviewed/acked-by
      - cleanup dt_bindings_check warnings
    
    Changes since v4:
      - cleanup usage of "status = okay|disabled"
      - fix remaining non-generic node names
      - rework sai nodes to not duplicate the existing settings in stm32mp151.dtsi
    
    Changes since v3:
      - cleanup board-compatible
      - cleanup aliases
      - rename nodes according to schema
      - use interrupt flag

Steffen Trumtrar (10):
  ARM: dts: stm32: Add alternate pinmux for ethernet
  ARM: dts: stm32: Add alternate pinmux for sai2b
  ARM: dts: stm32: Add new pinmux for sdmmc1_b4
  ARM: dts: stm32: Add new pinmux for sdmmc2_d47
  ARM: dts: stm32: Add pinmux for USART1 pins
  ARM: dts: stm32: Add idle/sleep pinmux for USART3
  ARM: dts: stm32: Add sleep pinmux for SPI1 pins_a
  dt-bindings: arm: stm32: Add Phytec STM32MP1 board
  ARM: dts: stm32: add STM32MP1-based Phytec SoM
  ARM: dts: stm32: add STM32MP1-based Phytec board

 .../devicetree/bindings/arm/stm32/stm32.yaml  |   6 +
 arch/arm/boot/dts/Makefile                    |   3 +-
 arch/arm/boot/dts/stm32mp15-pinctrl.dtsi      | 231 +++++++
 .../dts/stm32mp157c-phycore-stm32mp1-3.dts    |  65 ++
 .../stm32mp157c-phycore-stm32mp15-som.dtsi    | 594 ++++++++++++++++++
 5 files changed, 898 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts
 create mode 100644 arch/arm/boot/dts/stm32mp157c-phycore-stm32mp15-som.dtsi

-- 
2.39.1