[EXTERNAL] Re: [PATCH v5 3/5] soc: ti: pruss: Add pruss_cfg_read()/update() API
Md Danish Anwar
a0501179 at ti.com
Tue Mar 28 04:17:03 PDT 2023
On 28/03/23 02:31, Mathieu Poirier wrote:
> On Thu, Mar 23, 2023 at 11:54:49AM +0530, MD Danish Anwar wrote:
>> From: Suman Anna <s-anna at ti.com>
>>
>> Add two new generic API pruss_cfg_read() and pruss_cfg_update() to
>> the PRUSS platform driver to read and program respectively a register
>> within the PRUSS CFG sub-module represented by a syscon driver.
>>
>> These APIs are internal to PRUSS driver. Various useful registers
>> and macros for certain register bit-fields and their values have also
>> been added.
>>
>> Signed-off-by: Suman Anna <s-anna at ti.com>
>> Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk at linaro.org>
>> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk at linaro.org>
>> Signed-off-by: Puranjay Mohan <p-mohan at ti.com>
>> Signed-off-by: MD Danish Anwar <danishanwar at ti.com>
>> ---
>> drivers/soc/ti/pruss.c | 1 +
>> drivers/soc/ti/pruss.h | 112 +++++++++++++++++++++++++++++++++++++++++
>> 2 files changed, 113 insertions(+)
>> create mode 100644 drivers/soc/ti/pruss.h
>>
>
> This patch doesn't compile without warnings.
>
Sure, Mathieu. I'll check the warnings.
>> diff --git a/drivers/soc/ti/pruss.c b/drivers/soc/ti/pruss.c
>> index 126b672b9b30..2fa7df667592 100644
>> --- a/drivers/soc/ti/pruss.c
>> +++ b/drivers/soc/ti/pruss.c
>> @@ -21,6 +21,7 @@
>> #include <linux/regmap.h>
>> #include <linux/remoteproc.h>
>> #include <linux/slab.h>
>> +#include "pruss.h"
>>
>> /**
>> * struct pruss_private_data - PRUSS driver private data
>> diff --git a/drivers/soc/ti/pruss.h b/drivers/soc/ti/pruss.h
>> new file mode 100644
>> index 000000000000..4626d5f6b874
>> --- /dev/null
>> +++ b/drivers/soc/ti/pruss.h
>> @@ -0,0 +1,112 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * PRU-ICSS Subsystem user interfaces
>> + *
>> + * Copyright (C) 2015-2023 Texas Instruments Incorporated - http://www.ti.com
>> + * MD Danish Anwar <danishanwar at ti.com>
>> + */
>> +
>> +#ifndef _SOC_TI_PRUSS_H_
>> +#define _SOC_TI_PRUSS_H_
>> +
>> +#include <linux/bits.h>
>> +#include <linux/regmap.h>
>> +
>> +/*
>> + * PRU_ICSS_CFG registers
>> + * SYSCFG, ISRP, ISP, IESP, IECP, SCRP applicable on AMxxxx devices only
>> + */
>> +#define PRUSS_CFG_REVID 0x00
>> +#define PRUSS_CFG_SYSCFG 0x04
>> +#define PRUSS_CFG_GPCFG(x) (0x08 + (x) * 4)
>> +#define PRUSS_CFG_CGR 0x10
>> +#define PRUSS_CFG_ISRP 0x14
>> +#define PRUSS_CFG_ISP 0x18
>> +#define PRUSS_CFG_IESP 0x1C
>> +#define PRUSS_CFG_IECP 0x20
>> +#define PRUSS_CFG_SCRP 0x24
>> +#define PRUSS_CFG_PMAO 0x28
>> +#define PRUSS_CFG_MII_RT 0x2C
>> +#define PRUSS_CFG_IEPCLK 0x30
>> +#define PRUSS_CFG_SPP 0x34
>> +#define PRUSS_CFG_PIN_MX 0x40
>> +
>> +/* PRUSS_GPCFG register bits */
>> +#define PRUSS_GPCFG_PRU_GPO_SH_SEL BIT(25)
>> +
>> +#define PRUSS_GPCFG_PRU_DIV1_SHIFT 20
>> +#define PRUSS_GPCFG_PRU_DIV1_MASK GENMASK(24, 20)
>> +
>> +#define PRUSS_GPCFG_PRU_DIV0_SHIFT 15
>> +#define PRUSS_GPCFG_PRU_DIV0_MASK GENMASK(15, 19)
>> +
>> +#define PRUSS_GPCFG_PRU_GPO_MODE BIT(14)
>> +#define PRUSS_GPCFG_PRU_GPO_MODE_DIRECT 0
>> +#define PRUSS_GPCFG_PRU_GPO_MODE_SERIAL BIT(14)
>> +
>> +#define PRUSS_GPCFG_PRU_GPI_SB BIT(13)
>> +
>> +#define PRUSS_GPCFG_PRU_GPI_DIV1_SHIFT 8
>> +#define PRUSS_GPCFG_PRU_GPI_DIV1_MASK GENMASK(12, 8)
>> +
>> +#define PRUSS_GPCFG_PRU_GPI_DIV0_SHIFT 3
>> +#define PRUSS_GPCFG_PRU_GPI_DIV0_MASK GENMASK(7, 3)
>> +
>> +#define PRUSS_GPCFG_PRU_GPI_CLK_MODE_POSITIVE 0
>> +#define PRUSS_GPCFG_PRU_GPI_CLK_MODE_NEGATIVE BIT(2)
>> +#define PRUSS_GPCFG_PRU_GPI_CLK_MODE BIT(2)
>> +
>> +#define PRUSS_GPCFG_PRU_GPI_MODE_MASK GENMASK(1, 0)
>> +#define PRUSS_GPCFG_PRU_GPI_MODE_SHIFT 0
>> +
>> +#define PRUSS_GPCFG_PRU_MUX_SEL_SHIFT 26
>> +#define PRUSS_GPCFG_PRU_MUX_SEL_MASK GENMASK(29, 26)
>> +
>> +/* PRUSS_MII_RT register bits */
>> +#define PRUSS_MII_RT_EVENT_EN BIT(0)
>> +
>> +/* PRUSS_SPP register bits */
>> +#define PRUSS_SPP_XFER_SHIFT_EN BIT(1)
>> +#define PRUSS_SPP_PRU1_PAD_HP_EN BIT(0)
>> +#define PRUSS_SPP_RTU_XFR_SHIFT_EN BIT(3)
>> +
>> +/**
>> + * pruss_cfg_read() - read a PRUSS CFG sub-module register
>> + * @pruss: the pruss instance handle
>> + * @reg: register offset within the CFG sub-module
>> + * @val: pointer to return the value in
>> + *
>> + * Reads a given register within the PRUSS CFG sub-module and
>> + * returns it through the passed-in @val pointer
>> + *
>> + * Return: 0 on success, or an error code otherwise
>> + */
>> +static int pruss_cfg_read(struct pruss *pruss, unsigned int reg, unsigned int *val)
>> +{
>> + if (IS_ERR_OR_NULL(pruss))
>> + return -EINVAL;
>> +
>> + return regmap_read(pruss->cfg_regmap, reg, val);
>> +}
>> +
>> +/**
>> + * pruss_cfg_update() - configure a PRUSS CFG sub-module register
>> + * @pruss: the pruss instance handle
>> + * @reg: register offset within the CFG sub-module
>> + * @mask: bit mask to use for programming the @val
>> + * @val: value to write
>> + *
>> + * Programs a given register within the PRUSS CFG sub-module
>> + *
>> + * Return: 0 on success, or an error code otherwise
>> + */
>> +static int pruss_cfg_update(struct pruss *pruss, unsigned int reg,
>> + unsigned int mask, unsigned int val)
>> +{
>> + if (IS_ERR_OR_NULL(pruss))
>> + return -EINVAL;
>> +
>> + return regmap_update_bits(pruss->cfg_regmap, reg, mask, val);
>> +}
>> +
>> +#endif /* _SOC_TI_PRUSS_H_ */
>> --
>> 2.25.1
>>
--
Thanks and Regards,
Danish.
More information about the linux-arm-kernel
mailing list