[PATCH v6 2/2] arm64: dts: mediatek: enable i2c0 for mt8365-evk board

[AngeloGioacchino Del Regno]

Il 28/03/23 11:04, Alexandre Mergnat ha scritto:
> Enable the I2C0 bus provides communication with:
> - The integrated RT9466 Switching Battery Charger.
> - The integrated MT6691 LP4X buck for VDDQ.
> - The integrated MT6691 LP4X buck for VDD2.
> - The pin header, to plug external I2C devices.
> 
> Signed-off-by: Alexandre Mergnat <amergnat at baylibre.com>
> ---
>   arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 15 +++++++++++++++
>   1 file changed, 15 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
> index 4683704ea235..adc79ba14b33 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
> @@ -87,6 +87,13 @@ optee_reserved: optee at 43200000 {
>   	};
>   };
>   
> +&i2c0 {
> +	clock-frequency = <100000>;
> +	pinctrl-0 = <&i2c0_pins>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +};
> +
>   &pio {
>   	gpio_keys: gpio-keys-pins {
>   		pins {
> @@ -96,6 +103,14 @@ pins {
>   		};
>   	};
>   
> +	i2c0_pins: i2c0-pins {
> +		pins {
> +			bias-pull-up;

I prefer seeing pinmux first, any other properties last....
If Matthias can please fix that while applying...

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>