[PATCH] ARM: dts: stm32: fix spi1 pin assignment on stm32mp15

[Alexandre TORGUE]

On 3/20/23 18:11, Alexandre Torgue wrote:
> Bank A and B IOs can't be handled by the pin controller 'Z'. This patch
> assign spi1 pin definition to the correct controller.
> 
> Fixes: 9ad65d245b7b ("ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group")
> 
> Signed-off-by: Alexandre Torgue <alexandre.torgue at foss.st.com>
> 
> diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> index a9d2bec99014..e15a3b2a9b39 100644
> --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> @@ -1880,6 +1880,21 @@
>   		};
>   	};
>   
> +	spi1_pins_b: spi1-1 {
> +		pins1 {
> +			pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */
> +				 <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */
> +			bias-disable;
> +			drive-push-pull;
> +			slew-rate = <1>;
> +		};
> +
> +		pins2 {
> +			pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */
> +			bias-disable;
> +		};
> +	};
> +
>   	spi2_pins_a: spi2-0 {
>   		pins1 {
>   			pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI2_SCK */
> @@ -2448,19 +2463,4 @@
>   			bias-disable;
>   		};
>   	};
> -
> -	spi1_pins_b: spi1-1 {
> -		pins1 {
> -			pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */
> -				 <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */
> -			bias-disable;
> -			drive-push-pull;
> -			slew-rate = <1>;
> -		};
> -
> -		pins2 {
> -			pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */
> -			bias-disable;
> -		};
> -	};
>   };

Applied on stm32-next.

Thanks.
Alex