[PATCH v10 0/5] can: bxcan: add support for ST bxCAN controller

[Marc Kleine-Budde]

On 28.03.2023 09:33:23, Dario Binacchi wrote:
> The series adds support for the basic extended CAN controller (bxCAN)
> found in many low- to middle-end STM32 SoCs.
> 
> The driver has been tested on the stm32f469i-discovery board with a
> kernel version 5.19.0-rc2 in loopback + silent mode:
> 
> ip link set can0 type can bitrate 125000 loopback on listen-only on
> ip link set up can0
> candump can0 -L &
> cansend can0 300#AC.AB.AD.AE.75.49.AD.D1
> 
> For uboot and kernel compilation, as well as for rootfs creation I used
> buildroot:
> 
> make stm32f469_disco_sd_defconfig
> make
> 
> but I had to patch can-utils and busybox as can-utils and iproute are
> not compiled for MMU-less microcotrollers. In the case of can-utils,
> replacing the calls to fork() with vfork(), I was able to compile the
> package with working candump and cansend applications, while in the
> case of iproute, I ran into more than one problem and finally I decided
> to extend busybox's ip link command for CAN-type devices. I'm still
> wondering if it was really necessary, but this way I was able to test
> the driver.

Applied to linux-can-next.

Thanks,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung Nürnberg              | Phone: +49-5121-206917-129  |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20230328/a834f317/attachment.sig>