[PATCH v2 0/2] arm64: zynqmp: Update MALI 400 interrupt and clock names

[Michal Simek]

On 3/21/23 08:06, Parth Gajjar wrote:
> Motivation for the commit is to utilize the upstream community
> device tree so that the either modified ARM Mali 400 driver
> or upstream lima driver can be used.
> Added gpu node for zynqmp.
> Enabled gpu node for xilinx boards.
> 
> v2 change:
> - Added gpu node for zynqmp
> - Enabled gpu node for xilinx boards
> 
> Parth Gajjar (2):
>    dt-bindings: gpu: mali-utgard: Add xlnx,zynqmp-mali compatible
>    arm64: zynqmp: Add mali-400 gpu node for zynqmp
> 
>   .../devicetree/bindings/gpu/arm,mali-utgard.yaml     |  1 +
>   arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi       |  4 ++++
>   arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts    |  4 ++++
>   .../boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts      |  3 +++
>   .../boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts      |  4 ++++
>   arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts    |  4 ++++
>   arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts    |  4 ++++
>   arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts    |  4 ++++
>   arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts    |  4 ++++
>   arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts    |  4 ++++
>   arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts    |  4 ++++
>   arch/arm64/boot/dts/xilinx/zynqmp.dtsi               | 12 ++++++++++++
>   12 files changed, 52 insertions(+)
> 

Applied.
M