[PATCH 1/2] arm64: dts: imx8mm-verdin: correct off-on-delay

[Peng Fan (OSS)]

From: Peng Fan <peng.fan at nxp.com>

The property should be off-on-delay-us, not off-on-delay

Fixes: 6a57f224f734 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index 88321b5b0693..6f0811587142 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -99,7 +99,7 @@ reg_ethphy: regulator-ethphy {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; /* PMIC_EN_ETH */
-		off-on-delay = <500000>;
+		off-on-delay-us = <500000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_reg_eth>;
 		regulator-always-on;
@@ -139,7 +139,7 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
 		enable-active-high;
 		/* Verdin SD_1_PWR_EN (SODIMM 76) */
 		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
-		off-on-delay = <100000>;
+		off-on-delay-us = <100000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usdhc2_pwr_en>;
 		regulator-max-microvolt = <3300000>;
-- 
2.37.1