[PATCH v1 00/14] arm64: dts: imx8mq-librem5: updates and fixes until march 2023

[Shawn Guo]

On Thu, Mar 09, 2023 at 09:45:54PM +0100, Martin Kepplinger wrote:
> hi Shawn and all interested in the Librem 5 phone,
> 
> This is another round of updates to the phone DT description. Some are
> clear fixes, but some are important updates like the CSI changes
> that make the selfie cam work or the powersaving related things like
> the ddrc opp table entry and voltage changes.
> 
> As previously this is all mixed together because the changes are small.
> If you prefer separate, small "topic-patchsets", please say so.
> 
> thanks,
>                            martin
> 
> 
> Angus Ainslie (1):
>   arm64: dts: imx8mq-librem5: add the magnetometer mount matrix
> 
> Martin Kepplinger (4):
>   arm64: dts: imx8mq-librem5: lower the mipi csi 1 frequencies
>   arm64: dts: imx8mq-librem5: describe the clock for the csi sensors
>   arm64: dts: imx8mq-librem5: fix audio-1v8 regulator name
>   arm64: dts: imx8mq-librem5: add brightness levels to led-backlight
> 
> Sebastian Krzyszkowiak (9):
>   arm64: dts: imx8mq-librem5: Describe MIC_2V4 regulator
>   arm64: dts: imx8mq-librem5: Set charger parameters for each batch
>   arm64: dts: imx8mq-librem5: Set the DVS voltages lower
>   arm64: dts: imx8mq-librem5: Bump usdhc2 frequency to 100MHz
>   arm64: dts: imx8mq-librem5: Adjust proximity sensor's near levels
>   arm64: dts: imx8mq-librem5: Remove dis_u3_susphy_quirk from usb_dwc3_0
>   arm64: dts: imx8mq-librem5: Bump BUCK1 suspend voltage to 0.81V
>   arm64: dts: imx8mq-librem5: Reduce I2C frequency to 384kHz
>   arm64: dts: imx8mq-librem5: Add 166MHz to DDRC OPP table

Applied all, thanks!