[PATCH v3 01/11] dt-bindings: arm: Add support for DSB element size

[Tao Zhang]

Hi Suzuki,

在 3/23/2023 7:18 PM, Suzuki K Poulose 写道:
> On 23/03/2023 06:03, Tao Zhang wrote:
>> Add property "qcom,dsb-elem-size" to support DSB(Discrete Single
>> Bit) element for TPDM. The associated aggregator will read this
>> size before it is enabled. DSB element size currently only
>> supports 32-bit and 64-bit.
>>
>> Signed-off-by: Tao Zhang <quic_taozha at quicinc.com>
>> ---
>>   .../devicetree/bindings/arm/qcom,coresight-tpdm.yaml | 11 +++++++++++
>>   1 file changed, 11 insertions(+)
>>
>> diff --git 
>> a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml 
>> b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
>> index 5c08342..d9b6b613 100644
>> --- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
>> +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
>> @@ -44,6 +44,15 @@ properties:
>>       minItems: 1
>>       maxItems: 2
>
>
>>   +  qcom,dsb-element-size:
>> +    description:
>> +      Specifies the DSB(Discrete Single Bit) element size supported by
>> +      the monitor. The associated aggregator will read this size 
>> before it
>> +      is enabled. DSB element size currently only supports 32-bit 
>> and 64-bit.
>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +    minimum: 32
>> +    maximum: 64
>
> Shouldn't this be something like oneOf ? It is not a range, but one of
> those two specific values ?

Yes, "qcom,dsb-element-size" should be an optional option required in TPDM

devicetree. Other properties like "qcom,cmb-element-size", 
"qcom,tc-element-size"

and etc. will be added in a later patch series.

I will update this doc according to your advice in the next version of 
the patch.

Tao

>
> Suzuki
>
>