[PATCH v3 3/6] pinctrl: s32cc: refactor pin config parsing
Andy Shevchenko
andy.shevchenko at gmail.com
Thu Mar 23 11:44:28 PDT 2023
On Thu, Mar 23, 2023 at 4:49 PM Chester Lin <clin at suse.com> wrote:
>
> Move common codes into smaller inline functions and remove argument checks
> that are not actually used by pull up/down bits in S32 MSCR register.
in the S32
Reviewed-by: Andy Shevchenko <andy.shevchenko at gmail.com>
> Signed-off-by: Chester Lin <clin at suse.com>
> ---
> Changes v3:
> - Move the PIN_CONFIG_BIAS_DISABLE case to be with PU and PD cases since
> they have the same function call.
> - Roll back the argument checks of OUTPUT_ENABLE and INPUT_ENABLE cases
> since they were wrongly removed with the PU & PD parts in v2.
>
> drivers/pinctrl/nxp/pinctrl-s32cc.c | 52 ++++++++++++++++++-----------
> 1 file changed, 33 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/pinctrl/nxp/pinctrl-s32cc.c b/drivers/pinctrl/nxp/pinctrl-s32cc.c
> index f698e1a240ef..36f323f87785 100644
> --- a/drivers/pinctrl/nxp/pinctrl-s32cc.c
> +++ b/drivers/pinctrl/nxp/pinctrl-s32cc.c
> @@ -474,11 +474,38 @@ static int s32_get_slew_regval(int arg)
> return -EINVAL;
> }
>
> -static int s32_get_pin_conf(enum pin_config_param param, u32 arg,
> - unsigned int *mask, unsigned int *config)
> +static inline void s32_pin_set_pull(enum pin_config_param param,
> + unsigned int *mask, unsigned int *config)
> {
> + switch (param) {
> + case PIN_CONFIG_BIAS_DISABLE:
> + case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
> + *config &= ~(S32_MSCR_PUS | S32_MSCR_PUE);
> + break;
> + case PIN_CONFIG_BIAS_PULL_UP:
> + *config |= S32_MSCR_PUS | S32_MSCR_PUE;
> + break;
> + case PIN_CONFIG_BIAS_PULL_DOWN:
> + *config &= ~S32_MSCR_PUS;
> + *config |= S32_MSCR_PUE;
> + break;
> + default:
> + return;
> + }
> +
> + *mask |= S32_MSCR_PUS | S32_MSCR_PUE;
> +}
> +
> +static int s32_parse_pincfg(unsigned long pincfg, unsigned int *mask,
> + unsigned int *config)
> +{
> + enum pin_config_param param;
> + u32 arg;
> int ret;
>
> + param = pinconf_to_config_param(pincfg);
> + arg = pinconf_to_config_argument(pincfg);
> +
> switch (param) {
> /* All pins are persistent over suspend */
> case PIN_CONFIG_PERSIST_STATE:
> @@ -508,26 +535,15 @@ static int s32_get_pin_conf(enum pin_config_param param, u32 arg,
> *config |= S32_MSCR_SRE((u32)ret);
> *mask |= S32_MSCR_SRE(~0);
> break;
> + case PIN_CONFIG_BIAS_DISABLE:
> case PIN_CONFIG_BIAS_PULL_UP:
> - if (arg)
> - *config |= S32_MSCR_PUS;
> - else
> - *config &= ~S32_MSCR_PUS;
> - fallthrough;
> case PIN_CONFIG_BIAS_PULL_DOWN:
> - if (arg)
> - *config |= S32_MSCR_PUE;
> - else
> - *config &= ~S32_MSCR_PUE;
> - *mask |= S32_MSCR_PUE | S32_MSCR_PUS;
> + s32_pin_set_pull(param, mask, config);
> break;
> case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
> *config &= ~(S32_MSCR_ODE | S32_MSCR_OBE | S32_MSCR_IBE);
> *mask |= S32_MSCR_ODE | S32_MSCR_OBE | S32_MSCR_IBE;
> - fallthrough;
> - case PIN_CONFIG_BIAS_DISABLE:
> - *config &= ~(S32_MSCR_PUS | S32_MSCR_PUE);
> - *mask |= S32_MSCR_PUS | S32_MSCR_PUE;
> + s32_pin_set_pull(param, mask, config);
> break;
> default:
> return -EOPNOTSUPP;
> @@ -553,9 +569,7 @@ static int s32_pinconf_mscr_update(struct pinctrl_dev *pctldev,
> pin_get_name(pctldev, pin_id), num_configs);
>
> for (i = 0; i < num_configs; i++) {
> - ret = s32_get_pin_conf(pinconf_to_config_param(configs[i]),
> - pinconf_to_config_argument(configs[i]),
> - &mask, &config);
> + ret = s32_parse_pincfg(configs[i], &mask, &config);
> if (ret)
> return ret;
> }
> --
> 2.37.3
>
--
With Best Regards,
Andy Shevchenko
More information about the linux-arm-kernel
mailing list