[EXT] Re: [PATCH v3 1/3] dt-bindings: usb: cdns-imx8qm: add imx8qm cdns3 glue bindings

[Krzysztof Kozlowski]

On 22/03/2023 22:36, Frank Li wrote:
> 
> 
>> -----Original Message-----
>> From: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
>> Sent: Wednesday, March 22, 2023 4:32 PM
>> To: Frank Li <frank.li at nxp.com>
>> Cc: devicetree at vger.kernel.org; festevam at gmail.com; imx at lists.linux.dev;
>> kernel at pengutronix.de; krzysztof.kozlowski+dt at linaro.org; linux-arm-
>> kernel at lists.infradead.org; dl-linux-imx <linux-imx at nxp.com>; linux-
>> kernel at vger.kernel.org; robh+dt at kernel.org; s.hauer at pengutronix.de;
>> shawnguo at kernel.org
>> Subject: Re: [EXT] Re: [PATCH v3 1/3] dt-bindings: usb: cdns-imx8qm: add
>> imx8qm cdns3 glue bindings
>>
>> Caution: EXT Email
>>
>> On 22/03/2023 15:34, Frank Li wrote:
>>>
>>>
>>>> -----Original Message-----
>>>> From: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
>>>> Sent: Wednesday, March 22, 2023 2:32 AM
>>>> To: Frank Li <frank.li at nxp.
>>>>> +      - const: usb3_aclk
>>>>> +      - const: usb3_ipg_clk
>>>>> +      - const: usb3_core_pclk
>>>>> +
>>>>> +  assigned-clocks:
>>>>> +    items:
>>>>> +      - description: Phandle and clock specifoer of
>>>> IMX_SC_PM_CLK_MST_BUS.
>>>>
>>>> Drop useless pieces so "Phandle and clock specifoer of " and name the
>>>> hardware, not the syntax.
>>>>
>>>>> +
>>>>> +  assigned-clock-rates:
>>>>> +    items:
>>>>> +      - description: Should be in Range 100 - 600 Mhz.
>>>>
>>>> That's better but I still do not understand why do you need it in the
>>>> bindings. You never actually answered this question.
>>>
>>> I am not sure 100% sure the reason.
>>> I think difference system target's  axi bus frequency is difference,
>>> And just one time work, needn't software to manage it.
>>> Following other driver's code style may be another reason.
>>
>> That's the reason of heaving it in DTS. But I am asking about bindings.
>> You do understand you define here interface?
> 
> I defined here is descript AXI frequency for usb controller. Supposed difference
> Platform will have difference working frequency.  

I don't understand how does this answer my concerns of having it in DT
bindings. If you do not add it, you "will have difference working
frequency", so what's the point?

Best regards,
Krzysztof