[PATCH v5 00/12] soc: qcom: add UCSI function to PMIC GLINK

[Neil Armstrong]

The PMIC GLINK interface offers an UCSI endpoint for newer
SoCs, the UCSI exchange is necessary to configure the USB-C
port USB role and altmode on the SM8450 HDK and SM8550 MTP
boards.
Since the DT description is the same, support for SM8350 HDK
is also added.

This patchset focuses on USB and disables altmode support
on those 2 SoCs until DP altmode over the combo phy is
supported.

Depends on PMIC Glink patchset at [1].

[1] https://lore.kernel.org/all/20230130042003.577063-1-quic_bjorande@quicinc.com/

Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
Changes in v5:
- added review tag on patch 1
- fixed patch 9, remove useless port nodes added in patch 6
- Link to v4: https://lore.kernel.org/r/20230130-topic-sm8450-upstream-pmic-glink-v4-0-38bf0f5d07bd@linaro.org

Changes in v4:
- Handle remove for UCSI driver
- Fixup client mask match data handling
- Added USB ports bindings review tag
- Link to v3: https://lore.kernel.org/r/20230130-topic-sm8450-upstream-pmic-glink-v3-0-4c860d265d28@linaro.org

Changes in v3:
- Fixed patch 1 by moving mask to pmic_glink_of_match
- Fixed patch 8 by adding back hsphy
- Add bindings change to dwc3 to support separate HS & SS OF graph links
- Link to v2: https://lore.kernel.org/r/20230130-topic-sm8450-upstream-pmic-glink-v2-0-71fea256474f@linaro.org

Changes in v2:
- Moved the dwc3 port subnodes to dtsi
- Added SM8350 HDK support
- Added help about ucsi module name
- Added bindings acks
- Fixed sm8550 pmic glink compatible
- Added more description in config update patch
- Link to v1: https://lore.kernel.org/r/20230130-topic-sm8450-upstream-pmic-glink-v1-0-0b0acfad301e@linaro.org

---
Neil Armstrong (12):
      usb: typec: ucsi: add PMIC Glink UCSI driver
      dt-bindings: soc: qcom: qcom,pmic-glink: document SM8450 compatible
      dt-bindings: soc: qcom: qcom,pmic-glink: document SM8550 compatible
      soc: qcom: pmic_glink: register ucsi aux device
      dt-bindings: usb: snps,dwc3: document HS & SS OF graph ports
      arm64: dts: qcom: sm8350: add port subnodes in dwc3 node
      arm64: dts: qcom: sm8450: add port subnodes in dwc3 node
      arm64: dts: qcom: sm8550: add port subnodes in dwc3 node
      arm64: dts: qcom: sm8350-hdk: add pmic glink node
      arm64: dts: qcom: sm8450-hdk: add pmic glink node
      arm64: dts: qcom: sm8550-mtp: add pmic glink node
      arm64: defconfig: add PMIC GLINK modules

 .../bindings/soc/qcom/qcom,pmic-glink.yaml         |   2 +
 .../devicetree/bindings/usb/snps,dwc3.yaml         |  16 +
 arch/arm64/boot/dts/qcom/sm8350-hdk.dts            |  46 ++-
 arch/arm64/boot/dts/qcom/sm8350.dtsi               |  19 ++
 arch/arm64/boot/dts/qcom/sm8450-hdk.dts            |  45 ++-
 arch/arm64/boot/dts/qcom/sm8450.dtsi               |  19 ++
 arch/arm64/boot/dts/qcom/sm8550-mtp.dts            |  45 ++-
 arch/arm64/boot/dts/qcom/sm8550.dtsi               |  19 ++
 arch/arm64/configs/defconfig                       |   4 +
 drivers/soc/qcom/pmic_glink.c                      |  65 +++-
 drivers/usb/typec/ucsi/Kconfig                     |  10 +
 drivers/usb/typec/ucsi/Makefile                    |   1 +
 drivers/usb/typec/ucsi/ucsi_glink.c                | 345 +++++++++++++++++++++
 13 files changed, 621 insertions(+), 15 deletions(-)
---
base-commit: 6f72958a49f68553f2b6ff713e8c8e51a34c1e1e
change-id: 20230130-topic-sm8450-upstream-pmic-glink-3b3a0b7bcd33

Best regards,
-- 
Neil Armstrong <neil.armstrong at linaro.org>