[PATCH net-next 4/4] net: ethernet: ti: am65-cpsw: Enable SGMII mode for J721E

[Siddharth Vadapalli]

TI's J721E SoC supports SGMII mode with the CPSW9G instance of the CPSW
Ethernet Switch. Thus, enable it by adding SGMII mode to the extra_modes
member of the "j721e_cpswxg_pdata" SoC data.

Signed-off-by: Siddharth Vadapalli <s-vadapalli at ti.com>
---
 drivers/net/ethernet/ti/am65-cpsw-nuss.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/ti/am65-cpsw-nuss.c b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
index 66e1fe58b895..9ddb79776c88 100644
--- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c
+++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
@@ -2784,7 +2784,7 @@ static const struct am65_cpsw_pdata j721e_cpswxg_pdata = {
 	.quirks = 0,
 	.ale_dev_id = "am64-cpswxg",
 	.fdqring_mode = K3_RINGACC_RING_MODE_MESSAGE,
-	.extra_modes = BIT(PHY_INTERFACE_MODE_QSGMII),
+	.extra_modes = BIT(PHY_INTERFACE_MODE_QSGMII) | BIT(PHY_INTERFACE_MODE_SGMII),
 };
 
 static const struct of_device_id am65_cpsw_nuss_of_mtable[] = {
-- 
2.25.1