[PATCH v4 2/5] soc: ti: pruss: Add pruss_{request,release}_mem_region() API
Md Danish Anwar
a0501179 at ti.com
Tue Mar 21 03:45:20 PDT 2023
On 21/03/23 15:53, Roger Quadros wrote:
>
>
> On 21/03/2023 11:48, Md Danish Anwar wrote:
>> Hi Roger,
>>
>> On 21/03/23 14:54, Roger Quadros wrote:
>>> Hi,
>>>
>>> On 21/03/2023 07:23, Md Danish Anwar wrote:
>>>> Hi Andrew, Roger,
>>>>
>>>> On 20/03/23 21:48, Andrew Davis wrote:
>>>>> On 3/20/23 12:11 AM, Md Danish Anwar wrote:
>>>>>> Hi Roger,
>>>>>>
>>>>>> On 17/03/23 14:26, Roger Quadros wrote:
>>>>>>> Hi Andrew & Danish,
>>>>>>>
>>>>>>>
>>>>>>> On 13/03/2023 13:11, MD Danish Anwar wrote:
>>>>>>>> From: "Andrew F. Davis" <afd at ti.com>
>>>>>>>>
>>>>>>>> Add two new API - pruss_request_mem_region() & pruss_release_mem_region(),
>>>>>>>> to the PRUSS platform driver to allow client drivers to acquire and release
>>>>>>>> the common memory resources present within a PRU-ICSS subsystem. This
>>>>>>>> allows the client drivers to directly manipulate the respective memories,
>>>>>>>> as per their design contract with the associated firmware.
>>>>>>>>
>>>>>>>> Co-developed-by: Suman Anna <s-anna at ti.com>
>>>>>>>> Signed-off-by: Suman Anna <s-anna at ti.com>
>>>>>>>> Signed-off-by: Andrew F. Davis <afd at ti.com>
>>>>>>>> Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk at linaro.org>
>>>>>>>> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk at linaro.org>
>>>>>>>> Signed-off-by: MD Danish Anwar <danishanwar at ti.com>
>>>>>>>> Reviewed-by: Roger Quadros <rogerq at kernel.org>
>>>>>>>> ---
>>>>>>>> drivers/soc/ti/pruss.c | 77 ++++++++++++++++++++++++++++++++
>>>>>>>> include/linux/pruss_driver.h | 27 +++--------
>>>>>>>> include/linux/remoteproc/pruss.h | 39 ++++++++++++++++
>>>>>>>
>>>>>>>
>>>>>>> We have these 2 header files and I think anything that deals with
>>>>>>> 'struct pruss' should go in include/linux/pruss_driver.h
>>>>>>>
>>>>>>> Anything that deals with pru_rproc (i.e. struct rproc) should go in
>>>>>>> include/linux/remoteproc/pruss.h
>>>>>>>
>>>>>>> Do you agree?
>>>>>>>
>>>>>>
>>>>>> I agree with you Roger but Andrew is the right person to comment here as he is
>>>>>> the author of this and several other patches.
>>>>>>
>>>>>> Hi Andrew, Can you please comment on this?
>>>>>>
>>>>>
>>>>> Original idea was a consumer driver (like "ICSSG Ethernet Driver" in your other
>>>>> series) could just
>>>>>
>>>>> #include <linux/remoteproc/pruss.h>
>>>>>
>>>>> and get everything they need, and nothing they do not.
>>>>>
>>>>
>>>> If we plan on continuing the original idea, then I think keeping the header
>>>> files as it is will be the best. Because if we move anything that deals with
>>>> 'struct pruss' to include/linux/pruss_driver.h and anything that deals with
>>>> pru_rproc (i.e. struct rproc) to include/linux/remoteproc/pruss.h, then the
>>>> consumer drivers will need to do,
>>>>
>>>> #include <linux/remoteproc/pruss.h>
>>>> #include <linux/pruss_driver.h>
>>>>
>>>> Roger, should I keep the header files arrangement as it is?
>>>>
>>>
>>> OK but can we please rename one of them to something else so they don't
>>> sound very similar. Maybe you could use Andrew's suggestion below.
>>>
>>
>> Yes sure, I'll rename the header files to reduce confusion. The pruss_driver.h
>> is located in include/linux, implying it's not internal to PRUSS. So I will
>> keep this header file name as it is.
>>
>> There are total 3 pruss related header files.
>>
>> 1. include/linux/pruss_driver.h (Public header file, not internal to PRUSS,
>> will keep it as it is. This exists to allow communication between the pruss
>> core and the pru rproc driver which live in different subsystems.)
>
> Andrew asked you to rename this to pruss_internal.h
OK, I will change pruss_driver.h to pruss_internal.h
>
>> 2. include/linux/remoteproc/pruss.h (Public header file, not internal to PRUSS,
>> will keep it as it is. Only this header file needs to be included by client
>> drivers.)
>> 3. drivers/soc/ti/pruss.h (Internal to PRUSS, I will rename this to
>> pruss_internal.h, this file has private definitions and APIs to modify PRUSS
>> CFG space. This file is private to pruss.c)
>
> No point in changing this file's name as this is not visible elsewhere.
>
OK, I will keep drivers/soc/ti/pruss.h and include/linux/remoteproc/pruss.h as
it is.
>>
>> Please let me know if the above looks OK.
>>
>>>>> pruss_driver.h (which could be renamed pruss_internal.h) exists to allow
>>>>> comunication between the pruss core and the pru rproc driver which live
>>>>> in different subsystems.
>>>>>
>>>>> Andrew
>>>>>
>>>>>>>> 3 files changed, 121 insertions(+), 22 deletions(-)
>>>>>>>>
>>>>>>>> diff --git a/drivers/soc/ti/pruss.c b/drivers/soc/ti/pruss.c
>>>>>>>> index a169aa1ed044..c8053c0d735f 100644
>>>>>>>> --- a/drivers/soc/ti/pruss.c
>>>>>>>> +++ b/drivers/soc/ti/pruss.c
>>>>>>>> @@ -88,6 +88,82 @@ void pruss_put(struct pruss *pruss)
>>>>>>>> }
>>>>>>>> EXPORT_SYMBOL_GPL(pruss_put);
>>>>>>>> +/**
>>>>>>>> + * pruss_request_mem_region() - request a memory resource
>>>>>>>> + * @pruss: the pruss instance
>>>>>>>> + * @mem_id: the memory resource id
>>>>>>>> + * @region: pointer to memory region structure to be filled in
>>>>>>>> + *
>>>>>>>> + * This function allows a client driver to request a memory resource,
>>>>>>>> + * and if successful, will let the client driver own the particular
>>>>>>>> + * memory region until released using the pruss_release_mem_region()
>>>>>>>> + * API.
>>>>>>>> + *
>>>>>>>> + * Return: 0 if requested memory region is available (in such case pointer to
>>>>>>>> + * memory region is returned via @region), an error otherwise
>>>>>>>> + */
>>>>>>>> +int pruss_request_mem_region(struct pruss *pruss, enum pruss_mem mem_id,
>>>>>>>> + struct pruss_mem_region *region)
>>>>>>>> +{
>>>>>>>> + if (!pruss || !region || mem_id >= PRUSS_MEM_MAX)
>>>>>>>> + return -EINVAL;
>>>>>>>> +
>>>>>>>> + mutex_lock(&pruss->lock);
>>>>>>>> +
>>>>>>>> + if (pruss->mem_in_use[mem_id]) {
>>>>>>>> + mutex_unlock(&pruss->lock);
>>>>>>>> + return -EBUSY;
>>>>>>>> + }
>>>>>>>> +
>>>>>>>> + *region = pruss->mem_regions[mem_id];
>>>>>>>> + pruss->mem_in_use[mem_id] = region;
>>>>>>>> +
>>>>>>>> + mutex_unlock(&pruss->lock);
>>>>>>>> +
>>>>>>>> + return 0;
>>>>>>>> +}
>>>>>>>> +EXPORT_SYMBOL_GPL(pruss_request_mem_region);
>>>>>>>> +
>>>>>>>> +/**
>>>>>>>> + * pruss_release_mem_region() - release a memory resource
>>>>>>>> + * @pruss: the pruss instance
>>>>>>>> + * @region: the memory region to release
>>>>>>>> + *
>>>>>>>> + * This function is the complimentary function to
>>>>>>>> + * pruss_request_mem_region(), and allows the client drivers to
>>>>>>>> + * release back a memory resource.
>>>>>>>> + *
>>>>>>>> + * Return: 0 on success, an error code otherwise
>>>>>>>> + */
>>>>>>>> +int pruss_release_mem_region(struct pruss *pruss,
>>>>>>>> + struct pruss_mem_region *region)
>>>>>>>> +{
>>>>>>>> + int id;
>>>>>>>> +
>>>>>>>> + if (!pruss || !region)
>>>>>>>> + return -EINVAL;
>>>>>>>> +
>>>>>>>> + mutex_lock(&pruss->lock);
>>>>>>>> +
>>>>>>>> + /* find out the memory region being released */
>>>>>>>> + for (id = 0; id < PRUSS_MEM_MAX; id++) {
>>>>>>>> + if (pruss->mem_in_use[id] == region)
>>>>>>>> + break;
>>>>>>>> + }
>>>>>>>> +
>>>>>>>> + if (id == PRUSS_MEM_MAX) {
>>>>>>>> + mutex_unlock(&pruss->lock);
>>>>>>>> + return -EINVAL;
>>>>>>>> + }
>>>>>>>> +
>>>>>>>> + pruss->mem_in_use[id] = NULL;
>>>>>>>> +
>>>>>>>> + mutex_unlock(&pruss->lock);
>>>>>>>> +
>>>>>>>> + return 0;
>>>>>>>> +}
>>>>>>>> +EXPORT_SYMBOL_GPL(pruss_release_mem_region);
>>>>>>>> +
>>>>>>>> static void pruss_of_free_clk_provider(void *data)
>>>>>>>> {
>>>>>>>> struct device_node *clk_mux_np = data;
>>>>>>>> @@ -290,6 +366,7 @@ static int pruss_probe(struct platform_device *pdev)
>>>>>>>> return -ENOMEM;
>>>>>>>> pruss->dev = dev;
>>>>>>>> + mutex_init(&pruss->lock);
>>>>>>>> child = of_get_child_by_name(np, "memories");
>>>>>>>> if (!child) {
>>>>>>>> diff --git a/include/linux/pruss_driver.h b/include/linux/pruss_driver.h
>>>>>>>> index 86242fb5a64a..22b4b37d2536 100644
>>>>>>>> --- a/include/linux/pruss_driver.h
>>>>>>>> +++ b/include/linux/pruss_driver.h
>>>>>>>> @@ -9,37 +9,18 @@
>>>>>>>> #ifndef _PRUSS_DRIVER_H_
>>>>>>>> #define _PRUSS_DRIVER_H_
>>>>>>>> +#include <linux/mutex.h>
>>>>>>>> #include <linux/remoteproc/pruss.h>
>>>>>>>> #include <linux/types.h>
>>>>>>>> -/*
>>>>>>>> - * enum pruss_mem - PRUSS memory range identifiers
>>>>>>>> - */
>>>>>>>> -enum pruss_mem {
>>>>>>>> - PRUSS_MEM_DRAM0 = 0,
>>>>>>>> - PRUSS_MEM_DRAM1,
>>>>>>>> - PRUSS_MEM_SHRD_RAM2,
>>>>>>>> - PRUSS_MEM_MAX,
>>>>>>>> -};
>>>>>>>> -
>>>>>>>> -/**
>>>>>>>> - * struct pruss_mem_region - PRUSS memory region structure
>>>>>>>> - * @va: kernel virtual address of the PRUSS memory region
>>>>>>>> - * @pa: physical (bus) address of the PRUSS memory region
>>>>>>>> - * @size: size of the PRUSS memory region
>>>>>>>> - */
>>>>>>>> -struct pruss_mem_region {
>>>>>>>> - void __iomem *va;
>>>>>>>> - phys_addr_t pa;
>>>>>>>> - size_t size;
>>>>>>>> -};
>>>>>>>> -
>>>>>>>> /**
>>>>>>>> * struct pruss - PRUSS parent structure
>>>>>>>> * @dev: pruss device pointer
>>>>>>>> * @cfg_base: base iomap for CFG region
>>>>>>>> * @cfg_regmap: regmap for config region
>>>>>>>> * @mem_regions: data for each of the PRUSS memory regions
>>>>>>>> + * @mem_in_use: to indicate if memory resource is in use
>>>>>>>> + * @lock: mutex to serialize access to resources
>>>>>>>> * @core_clk_mux: clk handle for PRUSS CORE_CLK_MUX
>>>>>>>> * @iep_clk_mux: clk handle for PRUSS IEP_CLK_MUX
>>>>>>>> */
>>>>>>>> @@ -48,6 +29,8 @@ struct pruss {
>>>>>>>> void __iomem *cfg_base;
>>>>>>>> struct regmap *cfg_regmap;
>>>>>>>> struct pruss_mem_region mem_regions[PRUSS_MEM_MAX];
>>>>>>>> + struct pruss_mem_region *mem_in_use[PRUSS_MEM_MAX];
>>>>>>>> + struct mutex lock; /* PRU resource lock */
>>>>>>>> struct clk *core_clk_mux;
>>>>>>>> struct clk *iep_clk_mux;
>>>>>>>> };
>>>>>>>> diff --git a/include/linux/remoteproc/pruss.h
>>>>>>>> b/include/linux/remoteproc/pruss.h
>>>>>>>> index 93a98cac7829..33f930e0a0ce 100644
>>>>>>>> --- a/include/linux/remoteproc/pruss.h
>>>>>>>> +++ b/include/linux/remoteproc/pruss.h
>>>>>>>> @@ -44,6 +44,28 @@ enum pru_ctable_idx {
>>>>>>>> PRU_C31,
>>>>>>>> };
>>>>>>>> +/*
>>>>>>>> + * enum pruss_mem - PRUSS memory range identifiers
>>>>>>>> + */
>>>>>>>> +enum pruss_mem {
>>>>>>>> + PRUSS_MEM_DRAM0 = 0,
>>>>>>>> + PRUSS_MEM_DRAM1,
>>>>>>>> + PRUSS_MEM_SHRD_RAM2,
>>>>>>>> + PRUSS_MEM_MAX,
>>>>>>>> +};
>>>>>>>> +
>>>>>>>> +/**
>>>>>>>> + * struct pruss_mem_region - PRUSS memory region structure
>>>>>>>> + * @va: kernel virtual address of the PRUSS memory region
>>>>>>>> + * @pa: physical (bus) address of the PRUSS memory region
>>>>>>>> + * @size: size of the PRUSS memory region
>>>>>>>> + */
>>>>>>>> +struct pruss_mem_region {
>>>>>>>> + void __iomem *va;
>>>>>>>> + phys_addr_t pa;
>>>>>>>> + size_t size;
>>>>>>>> +};
>>>>>>>> +
>>>>>>>> struct device_node;
>>>>>>>> struct rproc;
>>>>>>>> struct pruss;
>>>>>>>> @@ -52,6 +74,10 @@ struct pruss;
>>>>>>>> struct pruss *pruss_get(struct rproc *rproc);
>>>>>>>> void pruss_put(struct pruss *pruss);
>>>>>>>> +int pruss_request_mem_region(struct pruss *pruss, enum pruss_mem mem_id,
>>>>>>>> + struct pruss_mem_region *region);
>>>>>>>> +int pruss_release_mem_region(struct pruss *pruss,
>>>>>>>> + struct pruss_mem_region *region);
>>>>>>>> #else
>>>>>>>> @@ -62,6 +88,19 @@ static inline struct pruss *pruss_get(struct rproc
>>>>>>>> *rproc)
>>>>>>>> static inline void pruss_put(struct pruss *pruss) { }
>>>>>>>> +static inline int pruss_request_mem_region(struct pruss *pruss,
>>>>>>>> + enum pruss_mem mem_id,
>>>>>>>> + struct pruss_mem_region *region)
>>>>>>>> +{
>>>>>>>> + return -EOPNOTSUPP;
>>>>>>>> +}
>>>>>>>> +
>>>>>>>> +static inline int pruss_release_mem_region(struct pruss *pruss,
>>>>>>>> + struct pruss_mem_region *region)
>>>>>>>> +{
>>>>>>>> + return -EOPNOTSUPP;
>>>>>>>> +}
>>>>>>>> +
>>>>>>>> #endif /* CONFIG_TI_PRUSS */
>>>>>>>> #if IS_ENABLED(CONFIG_PRU_REMOTEPROC)
>>>>>>>
>
>
> cheers,
> -roger
--
Thanks and Regards,
Danish.
More information about the linux-arm-kernel
mailing list