[EXT] Re: [PATCH v2 1/3] dt-bindings: usb: cdns-imx8qm: add imx8qm cdns3 glue bindings

[Frank Li]

> -----Original Message-----
> From: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> Sent: Sunday, March 19, 2023 6:13 AM
> To: Frank Li <frank.li at nxp.com>; shawnguo at kernel.org
> Cc: devicetree at vger.kernel.org; festevam at gmail.com; imx at lists.linux.dev;
> kernel at pengutronix.de; krzysztof.kozlowski+dt at linaro.org; linux-arm-
> kernel at lists.infradead.org; dl-linux-imx <linux-imx at nxp.com>; linux-
> kernel at vger.kernel.org; robh+dt at kernel.org; s.hauer at pengutronix.de
> Subject: Re: [EXT] Re: [PATCH v2 1/3] dt-bindings: usb: cdns-imx8qm: add
> imx8qm cdns3 glue bindings
> 
> Caution: EXT Email
> 
> On 17/03/2023 15:55, Frank Li wrote:
> >
> >
> >> -----Original Message-----
> >> From: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> >> Sent: Friday, March 17, 2023 4:09 AM
> >> To: Frank Li <frank.li at nxp.com>; shawnguo at kernel.org
> >> Cc: devicetree at vger.kernel.org; festevam at gmail.com;
> imx at lists.linux.dev;
> >> kernel at pengutronix.de; krzysztof.kozlowski+dt at linaro.org; linux-arm-
> >> kernel at lists.infradead.org; dl-linux-imx <linux-imx at nxp.com>; linux-
> >> kernel at vger.kernel.org; robh+dt at kernel.org; s.hauer at pengutronix.de
> >> Subject: [EXT] Re: [PATCH v2 1/3] dt-bindings: usb: cdns-imx8qm: add
> >> imx8qm cdns3 glue bindings
> >>
> >> Caution: EXT Email
> >>
> >> On 16/03/2023 22:27, Frank Li wrote:
> >>> NXP imx8qm integrates 1 cdns3 IP. This is glue layer device bindings.
> >>>
> >>
> >> Subject: drop second/last, redundant "bindings". The "dt-bindings"
> >> prefix is already stating that these are bindings.
> >>
> >>> Signed-off-by: Frank Li <Frank.Li at nxp.com>
> >>> ---
> >>>  .../bindings/usb/fsl,imx8qm-cdns3.yaml        | 122
> ++++++++++++++++++
> >>>  1 file changed, 122 insertions(+)
> >>>  create mode 100644
> Documentation/devicetree/bindings/usb/fsl,imx8qm-
> >> cdns3.yaml
> >>>
> >>> diff --git a/Documentation/devicetree/bindings/usb/fsl,imx8qm-
> >> cdns3.yaml b/Documentation/devicetree/bindings/usb/fsl,imx8qm-
> >> cdns3.yaml
> >>> new file mode 100644
> >>> index 000000000000..fc24df1e4483
> >>> --- /dev/null
> >>> +++ b/Documentation/devicetree/bindings/usb/fsl,imx8qm-cdns3.yaml
> >>> @@ -0,0 +1,122 @@
> >>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> >>> +# Copyright (c) 2020 NXP
> >>> +%YAML 1.2
> >>> +---
> >>> +$id:
> >>
> https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevice
> %2F&data=05%7C01%7Cfrank.li%40nxp.com%7Cc2d76d3694194fba130a08db
> 286ae90e%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C6381482118
> 66106607%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoi
> V2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=Lo
> JUcnJnBaGjywN1zF%2BuUpFVUmldixTci96NPzVuio0%3D&reserved=0
> >> tree.org%2Fschemas%2Fusb%2Ffsl%2Cimx8qm-
> >>
> cdns3.yaml%23&data=05%7C01%7CFrank.Li%40nxp.com%7Cac9af3d617dc4cf
> >>
> 14baf08db26c74b07%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C6
> >>
> 38146409617970248%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMD
> >>
> AiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C
> >>
> &sdata=EczZhjyMUGnnp7ZGfSvTj4lmOUuGlOtWYIsxxXIlNXw%3D&reserved
> >> =0
> >>> +$schema:
> >>
> https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevice
> %2F&data=05%7C01%7Cfrank.li%40nxp.com%7Cc2d76d3694194fba130a08db
> 286ae90e%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C6381482118
> 66106607%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoi
> V2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=Lo
> JUcnJnBaGjywN1zF%2BuUpFVUmldixTci96NPzVuio0%3D&reserved=0
> >> tree.org%2Fmeta-
> >>
> schemas%2Fcore.yaml%23&data=05%7C01%7CFrank.Li%40nxp.com%7Cac9a
> >>
> f3d617dc4cf14baf08db26c74b07%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C
> >>
> 0%7C0%7C638146409617970248%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiM
> >>
> C4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000
> >> %7C%7C%7C&sdata=uTNYuDm%2ByhZ56oQET2pX8sHpEqVvsUYtmOBCPX
> EK
> >> v40%3D&reserved=0
> >>> +
> >>> +title: NXP iMX8QM Soc USB Controller
> >>> +
> >>> +maintainers:
> >>> +  - Frank Li <Frank.Li at nxp.com>
> >>> +
> >>> +properties:
> >>> +  compatible:
> >>> +    const: fsl,imx8qm-usb3
> >>> +
> >>> +  reg:
> >>> +    items:
> >>> +      - description: Address and length of the register set for iMX USB3
> >> Platform Control
> >>
> >> Drop "Address and length of the"... or actually just maxItems: 1,
> >> because the description is a bit obvious.
> >>
> >>> +
> >>> +  "#address-cells":
> >>> +    enum: [ 1, 2 ]
> >>> +
> >>> +  "#size-cells":
> >>> +    enum: [ 1, 2 ]
> >>> +
> >>> +  ranges: true
> >>> +
> >>> +  clocks:
> >>> +    description:
> >>> +      A list of phandle and clock-specifier pairs for the clocks
> >>> +      listed in clock-names.
> >>
> >> Drop description.
> >>
> >>> +    items:
> >>> +      - description: Standby clock. Used during ultra low power states.
> >>> +      - description: USB bus clock for usb3 controller.
> >>> +      - description: AXI clock for AXI interface.
> >>> +      - description: ipg clock for register access.
> >>> +      - description: Core clock for usb3 controller.
> >>> +
> >>> +  clock-names:
> >>> +    items:
> >>> +      - const: usb3_lpm_clk
> >>> +      - const: usb3_bus_clk
> >>> +      - const: usb3_aclk
> >>> +      - const: usb3_ipg_clk
> >>> +      - const: usb3_core_pclk
> >>> +
> >>> +  assigned-clocks:
> >>> +    items:
> >>> +      - description: Phandle and clock specifier of IMX_SC_PM_CLK_PER.
> >>> +      - description: Phandle and clock specifoer of
> IMX_SC_PM_CLK_MISC.
> >>> +      - description: Phandle and clock specifoer of
> >> IMX_SC_PM_CLK_MST_BUS.
> >>> +
> >>> +  assigned-clock-rates:
> >>> +    items:
> >>> +      - description: Must be 125 Mhz.
> >>> +      - description: Must be 12 Mhz.
> >>> +      - description: Must be 250 Mhz.
> >>
> >> I would argue that both properties above are not needed. If your
> >> hardware requires fixed frequencies, clock provider can fix them, can't it?
> >
> > Clock provider don't know fixed value and turn on only used by client.
> 
> So maybe fix the clock provider? Or this device driver? Requiring by
> binding specific frequencies for every board is a bit redundant.

It is not for every boards, it is common for a chip family.  Only a place to set for
QM and QXP. 

The similar case is network driver, which require a specific frequency at clock assign.
Generally frequency is fixed,  clock source name may change at difference chips. 

> 
> Best regards,
> Krzysztof