[PATCH 0/8] arm64: dts: ti: j7: Add device-tree nodes for MCSPI

[Vaishnav Achath]

This series adds device tree nodes for Multi Channel Serial Peripheral
Interface (MCSPI) on J721E, J7200, J721S2 and J784S4 platforms. All the
MCSPI instances are disabled by default and can be enabled through overlays
as required, the changes were tested using spidev loopback test for all
instances and the data verified only for main_spi4 which is connected
internally as slave to mcu_spi2 for all existing J7 devices.

Vaishnav Achath (8):
  arm64: dts: ti: k3-j721e-main: Add MCSPI nodes
  arm64: dts: ti: k3-j721e-mcu-wakeup: Add MCSPI nodes
  arm64: dts: ti: k3-j7200-main: Add MCSPI nodes
  arm64: dts: ti: k3-j7200-mcu-wakeup: Add MCSPI nodes
  arm64: dts: ti: k3-j721s2-main: Add MCSPI nodes
  arm64: dts: ti: k3-j721s2-mcu-wakeup: Add MCSPI nodes
  arm64: dts: ti: k3-j784s4-main: Add MCSPI nodes
  arm64: dts: ti: k3-j784s4-mcu-wakeup: Add MCSPI nodes

 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi     | 88 +++++++++++++++++++
 .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi      | 33 +++++++
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     | 88 +++++++++++++++++++
 .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi      | 33 +++++++
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi    | 88 +++++++++++++++++++
 .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 33 +++++++
 arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi    | 88 +++++++++++++++++++
 .../boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi     | 33 +++++++
 8 files changed, 484 insertions(+)

-- 
2.17.1