[PATCH V2 5/8] iio: accel: add support for IIS328DQ variant
Jonathan Cameron
jic23 at kernel.org
Sun Mar 19 08:42:01 PDT 2023
On Sat, 18 Mar 2023 18:35:19 +0100
Stefan Wahren <stefan.wahren at i2se.com> wrote:
> Hi Jonathan,
>
> Am 18.03.23 um 16:58 schrieb Jonathan Cameron:
> > On Fri, 17 Mar 2023 11:33:20 +0100
> > Stefan Wahren <stefan.wahren at chargebyte.com> wrote:
> >
> >> Since the ST IIS328DQ accelerometer is compatible to the ST LIS331DL,
> >> just add the new compatible to the st_accel framework.
> >>
> >> Link: https://www.st.com/resource/en/datasheet/iis328dq.pdf
> >> Signed-off-by: Stefan Wahren <stefan.wahren at chargebyte.com>
> > Hi Stefan,
> >
> > Assuming the DT binding is fine with the DT maintainers, I plan to
> > pick the pair of IIO fixes up through my tree. Is there any strong
> > reason they should go via another route?
>
> i'm a little bit confused about consider this as "fixes", but i'm fine
> with them going your tree.
Me too. No idea why I wrote 'fixes' :)
Both queued up in IIO togreg branch though that's initially pushed out
as testing for 0-day to see if it can find anything we missed.
Jonathan
>
> Best regards
>
> >
> > It's common for the dts files to go via ARM soc in cases like this
> > and we tend not to worry that they are 'broken' until the binding docs
> > are visible via other trees. Other than that I can't see an obvious
> > reason not to split these up.
> >
> > Thanks,
> >
> > Jonathan
> >
> >> ---
> >> drivers/iio/accel/st_accel.h | 1 +
> >> drivers/iio/accel/st_accel_core.c | 1 +
> >> drivers/iio/accel/st_accel_i2c.c | 5 +++++
> >> drivers/iio/accel/st_accel_spi.c | 5 +++++
> >> 4 files changed, 12 insertions(+)
> >>
> >> diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h
> >> index 56ed0c776d4a..e7525615712b 100644
> >> --- a/drivers/iio/accel/st_accel.h
> >> +++ b/drivers/iio/accel/st_accel.h
> >> @@ -39,6 +39,7 @@
> >> #define LIS302DL_ACCEL_DEV_NAME "lis302dl"
> >> #define LSM303C_ACCEL_DEV_NAME "lsm303c_accel"
> >> #define SC7A20_ACCEL_DEV_NAME "sc7a20"
> >> +#define IIS328DQ_ACCEL_DEV_NAME "iis328dq"
> >>
> >>
> >> #ifdef CONFIG_IIO_BUFFER
> >> diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
> >> index 6b8562f684d5..5f7d81b44b1d 100644
> >> --- a/drivers/iio/accel/st_accel_core.c
> >> +++ b/drivers/iio/accel/st_accel_core.c
> >> @@ -517,6 +517,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
> >> .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
> >> .sensors_supported = {
> >> [0] = H3LIS331DL_ACCEL_DEV_NAME,
> >> + [1] = IIS328DQ_ACCEL_DEV_NAME,
> >> },
> >> .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
> >> .odr = {
> >> diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
> >> index 3f02fd5d5946..fb9e2d6f4210 100644
> >> --- a/drivers/iio/accel/st_accel_i2c.c
> >> +++ b/drivers/iio/accel/st_accel_i2c.c
> >> @@ -119,6 +119,10 @@ static const struct of_device_id st_accel_of_match[] = {
> >> .compatible = "silan,sc7a20",
> >> .data = SC7A20_ACCEL_DEV_NAME,
> >> },
> >> + {
> >> + .compatible = "st,iis328dq",
> >> + .data = IIS328DQ_ACCEL_DEV_NAME,
> >> + },
> >> {},
> >> };
> >> MODULE_DEVICE_TABLE(of, st_accel_of_match);
> >> @@ -157,6 +161,7 @@ static const struct i2c_device_id st_accel_id_table[] = {
> >> { LIS302DL_ACCEL_DEV_NAME },
> >> { LSM303C_ACCEL_DEV_NAME },
> >> { SC7A20_ACCEL_DEV_NAME },
> >> + { IIS328DQ_ACCEL_DEV_NAME },
> >> {},
> >> };
> >> MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
> >> diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
> >> index 5740dc1820bd..f72a24f45322 100644
> >> --- a/drivers/iio/accel/st_accel_spi.c
> >> +++ b/drivers/iio/accel/st_accel_spi.c
> >> @@ -100,6 +100,10 @@ static const struct of_device_id st_accel_of_match[] = {
> >> .compatible = "st,lsm303c-accel",
> >> .data = LSM303C_ACCEL_DEV_NAME,
> >> },
> >> + {
> >> + .compatible = "st,iis328dq",
> >> + .data = IIS328DQ_ACCEL_DEV_NAME,
> >> + },
> >> {}
> >> };
> >> MODULE_DEVICE_TABLE(of, st_accel_of_match);
> >> @@ -157,6 +161,7 @@ static const struct spi_device_id st_accel_id_table[] = {
> >> { LIS3DE_ACCEL_DEV_NAME },
> >> { LIS302DL_ACCEL_DEV_NAME },
> >> { LSM303C_ACCEL_DEV_NAME },
> >> + { IIS328DQ_ACCEL_DEV_NAME },
> >> {},
> >> };
> >> MODULE_DEVICE_TABLE(spi, st_accel_id_table);
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel at lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
More information about the linux-arm-kernel
mailing list