[PATCH V2 3/3] nvmem: u-boot-env: post-process "ethaddr" env variable
Rafał Miłecki
zajec5 at gmail.com
Sat Mar 18 10:13:56 PDT 2023
From: Rafał Miłecki <rafal at milecki.pl>
U-Boot environment variables are stored in ASCII format so "ethaddr"
requires parsing into binary to make it work with Ethernet interfaces.
This includes support for indexes to support #nvmem-cell-cells = <1>.
Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
---
drivers/nvmem/Kconfig | 1 +
drivers/nvmem/u-boot-env.c | 26 ++++++++++++++++++++++++++
2 files changed, 27 insertions(+)
diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index a2afba11c890..b291b27048c7 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -340,6 +340,7 @@ config NVMEM_U_BOOT_ENV
tristate "U-Boot environment variables support"
depends on OF && MTD
select CRC32
+ select GENERIC_NET_UTILS
help
U-Boot stores its setup as environment variables. This driver adds
support for verifying & exporting such data. It also exposes variables
diff --git a/drivers/nvmem/u-boot-env.c b/drivers/nvmem/u-boot-env.c
index 29b1d87a3c51..ee9fd9989b6e 100644
--- a/drivers/nvmem/u-boot-env.c
+++ b/drivers/nvmem/u-boot-env.c
@@ -4,6 +4,8 @@
*/
#include <linux/crc32.h>
+#include <linux/etherdevice.h>
+#include <linux/if_ether.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/mtd/mtd.h>
@@ -70,6 +72,25 @@ static int u_boot_env_read(void *context, unsigned int offset, void *val,
return 0;
}
+static int u_boot_env_read_post_process_ethaddr(void *context, const char *id, int index,
+ unsigned int offset, void *buf, size_t bytes)
+{
+ u8 mac[ETH_ALEN];
+
+ if (bytes != 3 * ETH_ALEN - 1)
+ return -EINVAL;
+
+ if (!mac_pton(buf, mac))
+ return -EINVAL;
+
+ if (index)
+ eth_addr_add(mac, index);
+
+ ether_addr_copy(buf, mac);
+
+ return 0;
+}
+
static int u_boot_env_add_cells(struct u_boot_env *priv, uint8_t *buf,
size_t data_offset, size_t data_len)
{
@@ -101,6 +122,11 @@ static int u_boot_env_add_cells(struct u_boot_env *priv, uint8_t *buf,
priv->cells[idx].offset = data_offset + value - data;
priv->cells[idx].bytes = strlen(value);
priv->cells[idx].np = of_get_child_by_name(dev->of_node, priv->cells[idx].name);
+ if (!strcmp(var, "ethaddr")) {
+ priv->cells[idx].raw_len = strlen(value);
+ priv->cells[idx].bytes = ETH_ALEN;
+ priv->cells[idx].read_post_process = u_boot_env_read_post_process_ethaddr;
+ }
}
if (WARN_ON(idx != priv->ncells))
--
2.34.1
More information about the linux-arm-kernel
mailing list