[PATCH] serial: imx: remove unused imx_uart_is_imx* functions
Uwe Kleine-König
u.kleine-koenig at pengutronix.de
Sat Mar 18 07:30:41 PDT 2023
On Fri, Mar 17, 2023 at 04:57:10PM -0400, Tom Rix wrote:
> clang with W=1 reports
> drivers/tty/serial/imx.c:292:19: error:
> unused function 'imx_uart_is_imx21' [-Werror,-Wunused-function]
> static inline int imx_uart_is_imx21(struct imx_port *sport)
> ^
> drivers/tty/serial/imx.c:297:19: error:
> unused function 'imx_uart_is_imx53' [-Werror,-Wunused-function]
> static inline int imx_uart_is_imx53(struct imx_port *sport)
> ^
> drivers/tty/serial/imx.c:302:19: error:
> unused function 'imx_uart_is_imx6q' [-Werror,-Wunused-function]
> static inline int imx_uart_is_imx6q(struct imx_port *sport)
> ^
> These static functions are not used, so remove them.
>
> Signed-off-by: Tom Rix <trix at redhat.com>
Funny, is_imx6q_uart() was introduced in
a496e6284c482555db8078190bb689594d129fa9 and never used. Since that
commit is_imx21_uart() also unused. And the imx53 variant was also never
used.
Looking at that a bit more, the following cleanup is also possible (only
compile tested):
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 8308a23c55a7..a38ee0ed2210 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -178,8 +178,6 @@
enum imx_uart_type {
IMX1_UART,
IMX21_UART,
- IMX53_UART,
- IMX6Q_UART,
};
/* device type dependent stuff */
@@ -241,30 +239,21 @@ struct imx_port_ucrs {
unsigned int ucr3;
};
-static struct imx_uart_data imx_uart_devdata[] = {
- [IMX1_UART] = {
- .uts_reg = IMX1_UTS,
- .devtype = IMX1_UART,
- },
- [IMX21_UART] = {
- .uts_reg = IMX21_UTS,
- .devtype = IMX21_UART,
- },
- [IMX53_UART] = {
- .uts_reg = IMX21_UTS,
- .devtype = IMX53_UART,
- },
- [IMX6Q_UART] = {
- .uts_reg = IMX21_UTS,
- .devtype = IMX6Q_UART,
- },
+static const struct imx_uart_data imx_uart_imx1_devdata = {
+ .uts_reg = IMX1_UTS,
+ .devtype = IMX1_UART,
+};
+
+static const struct imx_uart_data imx_uart_imx21_devdata = {
+ .uts_reg = IMX21_UTS,
+ .devtype = IMX21_UART,
};
static const struct of_device_id imx_uart_dt_ids[] = {
- { .compatible = "fsl,imx6q-uart", .data = &imx_uart_devdata[IMX6Q_UART], },
- { .compatible = "fsl,imx53-uart", .data = &imx_uart_devdata[IMX53_UART], },
- { .compatible = "fsl,imx1-uart", .data = &imx_uart_devdata[IMX1_UART], },
- { .compatible = "fsl,imx21-uart", .data = &imx_uart_devdata[IMX21_UART], },
+ { .compatible = "fsl,imx6q-uart", .data = &imx_uart_imx21_devdata, },
+ { .compatible = "fsl,imx53-uart", .data = &imx_uart_imx21_devdata, },
+ { .compatible = "fsl,imx1-uart", .data = &imx_uart_imx1_devdata, },
+ { .compatible = "fsl,imx21-uart", .data = &imx_uart_imx21_devdata, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, imx_uart_dt_ids);
If you feel like squashing that into your commit or put it into a
separate commit with a nice commit log (after convincing yourself that
the change is fine), feel free to do so.
If you don't:
Reviewed-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | https://www.pengutronix.de/ |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20230318/5b29180f/attachment-0001.sig>
More information about the linux-arm-kernel
mailing list