[PATCH v29 1/7] dt-bindings: mediatek: add ethdr definition for mt8195

[AngeloGioacchino Del Regno]

Il 17/03/23 10:03, Krzysztof Kozlowski ha scritto:
> On 17/03/2023 08:55, Nancy Lin (林欣螢) wrote:
>> On Thu, 2023-03-16 at 12:36 +0100, Krzysztof Kozlowski wrote:
>>> On 16/03/2023 10:53, AngeloGioacchino Del Regno wrote:
>>>
>>>> Hello Krzysztof, Nancy,
>>>>
>>>> Since this series has reached v29, can we please reach an agreement
>>>> on the bindings
>>>> to use here, so that we can get this finally upstreamed?
>>>>
>>>> I will put some examples to try to get this issue resolved.
>>>>
>>>> ### Example 1: Constrain the number of GCE entries to *seven* array
>>>> elements (7x4!)
>>>>
>>>>     mediatek,gce-client-reg:
>>>>       $ref: /schemas/types.yaml#/definitions/phandle-array
>>>>       maxItems: 1
>>>>       description: The register of display function block to be set
>>>> by gce.
>>>>         There are 4 arguments in this property, gce node, subsys id,
>>>> offset and
>>>>         register size. The subsys id is defined in the gce header of
>>>> each chips
>>>>         include/dt-bindings/gce/<chip>-gce.h, mapping to the
>>>> register of display
>>>>         function block.
>>>>       items:
>>>>         minItems: 28
>>>>         maxItems: 28
>>>>         items:                     <----- this block doesn't seem to
>>>> get checked :\
>>>>           - description: phandle of GCE
>>>>           - description: GCE subsys id
>>>>           - description: register offset
>>>>           - description: register size
>>>
>>> This is what we would like to have but it requires exception in
>>> dtschema. Thus:
>>>
>>>>
>>>>
>>>> ### Example 2: Don't care about constraining the number of
>>>> arguments
>>>>
>>>>     mediatek,gce-client-reg:
>>>>       $ref: /schemas/types.yaml#/definitions/phandle-array
>>>>       maxItems: 1
>>>>       description: The register of display function block to be set
>>>> by gce.
>>>>         There are 4 arguments in this property, gce node, subsys id,
>>>> offset and
>>>>         register size. The subsys id is defined in the gce header of
>>>> each chips
>>>>         include/dt-bindings/gce/<chip>-gce.h, mapping to the
>>>> register of display
>>>>         function block.
>>>
>>> use this.
>>>
>>> Best regards,
>>> Krzysztof
>>
>>
>> Hi Krzysztof, Angelo,
>>
>> Thanks for the comment.
>> The Example 2 can pass dt_binding_check.
>>
>> But the example in the binding has 7 items [1] and dts [2]. Does the
>> "maxItems: 1" affect any other schema or dts check?
> 
> Ah, then it should be maxItems: 7, not 1.
> 

Keep in mind for your v30:

maxItems: 7 will pass - but only if minItems is *not* 7 :-)

-> (so, do not declare minItems, as default is 1) <-

Regards,
Angelo

> Best regards,
> Krzysztof
>