[PATCH V2 3/3] arm64: defconfig: Enable drivers for BeaglePlay
Nishanth Menon
nm at ti.com
Thu Mar 16 08:21:43 PDT 2023
Enable drivers used on BeaglePlay[1]:
* MDIO_GPIO driver to workaround erratum i2329, DP83TD510 SPE phy
(enabled in-kernel to ease usage)
* TPS65219 PMIC, regulator and power button as modules
* BQ32K battery backedup RTC and the K3 RTC drivers as modules
* OMAP2 SPI driver as module for accessing mikrobus
bloat-o-meter reports after this change (v6.3-rc1, clang 17.0.0):
add/remove: 22/3 grow/shrink: 2/0 up/down: 4328/-24 (4304)
[...]
Total: Before=27748314, After=27752618, chg +0.02%
[1] https://beagleplay.org
Signed-off-by: Nishanth Menon <nm at ti.com>
---
Changes since V1:
- Added CONFIG_SPI_OMAP24XX as module to get to mikrobus spi interface.
- Commit message updated to indicate bloat w.r.t v6.3.1 rather than
using random linux-next tag.
V1: https://lore.kernel.org/r/20230311111022.23717-4-nm@ti.com
arch/arm64/configs/defconfig | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 7790ee42c68a..ca3569261713 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -367,11 +367,13 @@ CONFIG_AT803X_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_ROCKCHIP_PHY=y
CONFIG_DP83867_PHY=y
+CONFIG_DP83TD510_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_CAN_FLEXCAN=m
CONFIG_CAN_RCAR=m
CONFIG_CAN_RCAR_CANFD=m
CONFIG_CAN_MCP251XFD=m
+CONFIG_MDIO_GPIO=y
CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y
CONFIG_MDIO_BUS_MUX_MMIOREG=y
CONFIG_USB_PEGASUS=m
@@ -418,6 +420,7 @@ CONFIG_TOUCHSCREEN_EDT_FT5X06=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PM8941_PWRKEY=y
CONFIG_INPUT_PM8XXX_VIBRATOR=m
+CONFIG_INPUT_TPS65219_PWRBUTTON=m
CONFIG_INPUT_PWM_BEEPER=m
CONFIG_INPUT_PWM_VIBRA=m
CONFIG_INPUT_HISI_POWERKEY=y
@@ -513,6 +516,7 @@ CONFIG_SPI_MESON_SPICC=m
CONFIG_SPI_MESON_SPIFC=m
CONFIG_SPI_MT65XX=y
CONFIG_SPI_MTK_NOR=m
+CONFIG_SPI_OMAP24XX=m
CONFIG_SPI_ORION=y
CONFIG_SPI_PL022=y
CONFIG_SPI_ROCKCHIP=y
@@ -670,6 +674,7 @@ CONFIG_MFD_SPMI_PMIC=y
CONFIG_MFD_RK808=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SL28CPLD=y
+CONFIG_MFD_TPS65219=m
CONFIG_MFD_ROHM_BD718XX=y
CONFIG_MFD_WCD934X=m
CONFIG_REGULATOR_FIXED_VOLTAGE=y
@@ -699,6 +704,7 @@ CONFIG_REGULATOR_QCOM_SPMI=y
CONFIG_REGULATOR_RK808=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_TPS65132=m
+CONFIG_REGULATOR_TPS65219=m
CONFIG_REGULATOR_VCTRL=m
CONFIG_RC_CORE=m
CONFIG_RC_DECODERS=y
@@ -1026,6 +1032,7 @@ CONFIG_RTC_DRV_RK808=m
CONFIG_RTC_DRV_PCF85063=m
CONFIG_RTC_DRV_PCF85363=m
CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_BQ32K=m
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RV3028=m
CONFIG_RTC_DRV_RV8803=m
@@ -1045,6 +1052,7 @@ CONFIG_RTC_DRV_SNVS=m
CONFIG_RTC_DRV_IMX_SC=m
CONFIG_RTC_DRV_MT6397=m
CONFIG_RTC_DRV_XGENE=y
+CONFIG_RTC_DRV_TI_K3=m
CONFIG_DMADEVICES=y
CONFIG_DMA_BCM2835=y
CONFIG_DMA_SUN6I=m
--
2.40.0
More information about the linux-arm-kernel
mailing list