[EXTERNAL] Re: [PATCH v4 3/5] soc: ti: pruss: Add pruss_cfg_read()/update() API

Thu Mar 16 04:32:32 PDT 2023

On 16/03/2023 13:29, Md Danish Anwar wrote:
> Roger,
> 
> On 16/03/23 16:38, Md Danish Anwar wrote:
>>
>> On 15/03/23 17:37, Roger Quadros wrote:
>>> Danish,
>>>
>>> On 13/03/2023 13:11, MD Danish Anwar wrote:
>>>> From: Suman Anna <s-anna at ti.com>
>>>>
>>>> Add two new generic API pruss_cfg_read() and pruss_cfg_update() to
>>>> the PRUSS platform driver to read and program respectively a register
>>>> within the PRUSS CFG sub-module represented by a syscon driver.
>>>>
>>>> These APIs are internal to PRUSS driver. Various useful registers
>>>> and macros for certain register bit-fields and their values have also
>>>> been added.
>>>>
>>>> Signed-off-by: Suman Anna <s-anna at ti.com>
>>>> Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk at linaro.org>
>>>> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk at linaro.org>
>>>> Signed-off-by: Puranjay Mohan <p-mohan at ti.com>
>>>> Signed-off-by: MD Danish Anwar <danishanwar at ti.com>
>>>> ---
>>>>  drivers/soc/ti/pruss.c           | 39 ++++++++++++++
>>>>  include/linux/remoteproc/pruss.h | 87 ++++++++++++++++++++++++++++++++
>>>>  2 files changed, 126 insertions(+)
>>>>
>>>> diff --git a/drivers/soc/ti/pruss.c b/drivers/soc/ti/pruss.c
>>>> index c8053c0d735f..26d8129b515c 100644
>>>> --- a/drivers/soc/ti/pruss.c
>>>> +++ b/drivers/soc/ti/pruss.c
>>>> @@ -164,6 +164,45 @@ int pruss_release_mem_region(struct pruss *pruss,
>>>>  }
>>>>  EXPORT_SYMBOL_GPL(pruss_release_mem_region);
>>>>  
>>>> +/**
>>>> + * pruss_cfg_read() - read a PRUSS CFG sub-module register
>>>> + * @pruss: the pruss instance handle
>>>> + * @reg: register offset within the CFG sub-module
>>>> + * @val: pointer to return the value in
>>>> + *
>>>> + * Reads a given register within the PRUSS CFG sub-module and
>>>> + * returns it through the passed-in @val pointer
>>>> + *
>>>> + * Return: 0 on success, or an error code otherwise
>>>> + */
>>>> +static int pruss_cfg_read(struct pruss *pruss, unsigned int reg, unsigned int *val)
>>>> +{
>>>> +	if (IS_ERR_OR_NULL(pruss))
>>>> +		return -EINVAL;
>>>> +
>>>> +	return regmap_read(pruss->cfg_regmap, reg, val);
>>>> +}
>>>> +
>>>> +/**
>>>> + * pruss_cfg_update() - configure a PRUSS CFG sub-module register
>>>> + * @pruss: the pruss instance handle
>>>> + * @reg: register offset within the CFG sub-module
>>>> + * @mask: bit mask to use for programming the @val
>>>> + * @val: value to write
>>>> + *
>>>> + * Programs a given register within the PRUSS CFG sub-module
>>>> + *
>>>> + * Return: 0 on success, or an error code otherwise
>>>> + */
>>>> +static int pruss_cfg_update(struct pruss *pruss, unsigned int reg,
>>>> +			    unsigned int mask, unsigned int val)
>>>> +{
>>>> +	if (IS_ERR_OR_NULL(pruss))
>>>> +		return -EINVAL;
>>>> +
>>>> +	return regmap_update_bits(pruss->cfg_regmap, reg, mask, val);
>>>> +}
>>>> +
>>>>  static void pruss_of_free_clk_provider(void *data)
>>>>  {
>>>>  	struct device_node *clk_mux_np = data;
>>>> diff --git a/include/linux/remoteproc/pruss.h b/include/linux/remoteproc/pruss.h
>>>> index 33f930e0a0ce..12ef10b9fe9a 100644
>>>> --- a/include/linux/remoteproc/pruss.h
>>>> +++ b/include/linux/remoteproc/pruss.h
>>>> @@ -10,12 +10,99 @@
>>>>  #ifndef __LINUX_PRUSS_H
>>>>  #define __LINUX_PRUSS_H
>>>>  
>>>> +#include <linux/bits.h>
>>>>  #include <linux/device.h>
>>>>  #include <linux/err.h>
>>>>  #include <linux/types.h>
>>>>  
>>>>  #define PRU_RPROC_DRVNAME "pru-rproc"
>>>>  
>>>> +/*
>>>> + * PRU_ICSS_CFG registers
>>>> + * SYSCFG, ISRP, ISP, IESP, IECP, SCRP applicable on AMxxxx devices only
>>>> + */
>>>> +#define PRUSS_CFG_REVID		0x00
>>>> +#define PRUSS_CFG_SYSCFG	0x04
>>>> +#define PRUSS_CFG_GPCFG(x)	(0x08 + (x) * 4)
>>>> +#define PRUSS_CFG_CGR		0x10
>>>> +#define PRUSS_CFG_ISRP		0x14
>>>> +#define PRUSS_CFG_ISP		0x18
>>>> +#define PRUSS_CFG_IESP		0x1C
>>>> +#define PRUSS_CFG_IECP		0x20
>>>> +#define PRUSS_CFG_SCRP		0x24
>>>> +#define PRUSS_CFG_PMAO		0x28
>>>> +#define PRUSS_CFG_MII_RT	0x2C
>>>> +#define PRUSS_CFG_IEPCLK	0x30
>>>> +#define PRUSS_CFG_SPP		0x34
>>>> +#define PRUSS_CFG_PIN_MX	0x40
>>>> +
>>>> +/* PRUSS_GPCFG register bits */
>>>> +#define PRUSS_GPCFG_PRU_GPO_SH_SEL		BIT(25)
>>>> +
>>>> +#define PRUSS_GPCFG_PRU_DIV1_SHIFT		20
>>>> +#define PRUSS_GPCFG_PRU_DIV1_MASK		GENMASK(24, 20)
>>>> +
>>>> +#define PRUSS_GPCFG_PRU_DIV0_SHIFT		15
>>>> +#define PRUSS_GPCFG_PRU_DIV0_MASK		GENMASK(15, 19)
>>>> +
>>>> +#define PRUSS_GPCFG_PRU_GPO_MODE		BIT(14)
>>>> +#define PRUSS_GPCFG_PRU_GPO_MODE_DIRECT		0
>>>> +#define PRUSS_GPCFG_PRU_GPO_MODE_SERIAL		BIT(14)
>>>> +
>>>> +#define PRUSS_GPCFG_PRU_GPI_SB			BIT(13)
>>>> +
>>>> +#define PRUSS_GPCFG_PRU_GPI_DIV1_SHIFT		8
>>>> +#define PRUSS_GPCFG_PRU_GPI_DIV1_MASK		GENMASK(12, 8)
>>>> +
>>>> +#define PRUSS_GPCFG_PRU_GPI_DIV0_SHIFT		3
>>>> +#define PRUSS_GPCFG_PRU_GPI_DIV0_MASK		GENMASK(7, 3)
>>>> +
>>>> +#define PRUSS_GPCFG_PRU_GPI_CLK_MODE_POSITIVE	0
>>>> +#define PRUSS_GPCFG_PRU_GPI_CLK_MODE_NEGATIVE	BIT(2)
>>>> +#define PRUSS_GPCFG_PRU_GPI_CLK_MODE		BIT(2)
>>>> +
>>>> +#define PRUSS_GPCFG_PRU_GPI_MODE_MASK		GENMASK(1, 0)
>>>> +#define PRUSS_GPCFG_PRU_GPI_MODE_SHIFT		0
>>>> +
>>>> +#define PRUSS_GPCFG_PRU_MUX_SEL_SHIFT		26
>>>> +#define PRUSS_GPCFG_PRU_MUX_SEL_MASK		GENMASK(29, 26)
>>>> +
>>>> +/* PRUSS_MII_RT register bits */
>>>> +#define PRUSS_MII_RT_EVENT_EN			BIT(0)
>>>> +
>>>> +/* PRUSS_SPP register bits */
>>>> +#define PRUSS_SPP_XFER_SHIFT_EN			BIT(1)
>>>> +#define PRUSS_SPP_PRU1_PAD_HP_EN		BIT(0)
>>>
>>> Can we please move all the above definitions to private driver/soc/ti/pruss.h?
>>> You can also add pruss_cfg_read and pruss_cfg_update there.
>>>
> 
> There is no driver/soc/ti/pruss.h. The pruss.h file is located in
> include/linux/remoteproc/pruss.h and there is one pruss_driver.h file which is
> located in include/linux/pruss_driver.h
> 
> Do you want me to create another header file at driver/soc/ti/pruss.h and place
> all these definitions inside that?
> 
> Please let me know.

Yes. All private definitions should sit in driver/soc/ti/pruss.h

cheers,
roger