[PATCH net v2 1/2] net: stmmac: fix PHY handle parsing

[Michael Sit Wei Hong]

phylink_fwnode_phy_connect returns 0 when set to MLO_AN_INBAND.
This causes the PHY handle parsing to skip and the PHY will not be attached
to the MAC.

Add additional check for PHY handle parsing when set to MLO_AN_INBAND.

Fixes: ab21cf920928 ("net: stmmac: make mdio register skips PHY scanning for fixed-link")
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit at intel.com>
Signed-off-by: Lai Peter Jun Ann <peter.jun.ann.lai at intel.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 8f543c3ab5c5..398adcd68ee8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1134,6 +1134,7 @@ static void stmmac_check_pcs_mode(struct stmmac_priv *priv)
 static int stmmac_init_phy(struct net_device *dev)
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
+	struct fwnode_handle *fixed_node;
 	struct fwnode_handle *fwnode;
 	int ret;
 
@@ -1141,13 +1142,16 @@ static int stmmac_init_phy(struct net_device *dev)
 	if (!fwnode)
 		fwnode = dev_fwnode(priv->device);
 
-	if (fwnode)
+	if (fwnode) {
+		fixed_node = fwnode_get_named_child_node(fwnode, "fixed-link");
+		fwnode_handle_put(fixed_node);
 		ret = phylink_fwnode_phy_connect(priv->phylink, fwnode, 0);
+	}
 
 	/* Some DT bindings do not set-up the PHY handle. Let's try to
 	 * manually parse it
 	 */
-	if (!fwnode || ret) {
+	if (!fwnode || ret || !fixed_node) {
 		int addr = priv->plat->phy_addr;
 		struct phy_device *phydev;
 
-- 
2.34.1