[PATCH v11 12/13] arm64: dts: ls1088a: Prevent PCSs from probing as phys

[Sean Anderson]

The internal PCSs are not always accessible during boot (such as if the
serdes has deselected the appropriate link mode). Give them appropriate
compatible strings so they don't automatically (fail to) probe as
genphys.

Signed-off-by: Sean Anderson <sean.anderson at seco.com>

---

(no changes since v8)

Changes in v8:
- New

 .../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 30 ++++++++++++-------
 1 file changed, 20 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 59b401daad4d..bbc714f84577 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -932,7 +932,8 @@ pcs_mdio1: mdio at 8c07000 {
 			#size-cells = <0>;
 			status = "disabled";
 
-			pcs1: ethernet-phy at 0 {
+			pcs1: ethernet-pcs at 0 {
+				compatible = "fsl,lynx-pcs";
 				reg = <0>;
 			};
 		};
@@ -945,7 +946,8 @@ pcs_mdio2: mdio at 8c0b000 {
 			#size-cells = <0>;
 			status = "disabled";
 
-			pcs2: ethernet-phy at 0 {
+			pcs2: ethernet-pcs at 0 {
+				compatible = "fsl,lynx-pcs";
 				reg = <0>;
 			};
 		};
@@ -958,19 +960,23 @@ pcs_mdio3: mdio at 8c0f000 {
 			#size-cells = <0>;
 			status = "disabled";
 
-			pcs3_0: ethernet-phy at 0 {
+			pcs3_0: ethernet-pcs at 0 {
+				compatible = "fsl,lynx-pcs";
 				reg = <0>;
 			};
 
-			pcs3_1: ethernet-phy at 1 {
+			pcs3_1: ethernet-pcs at 1 {
+				compatible = "fsl,lynx-pcs";
 				reg = <1>;
 			};
 
-			pcs3_2: ethernet-phy at 2 {
+			pcs3_2: ethernet-pcs at 2 {
+				compatible = "fsl,lynx-pcs";
 				reg = <2>;
 			};
 
-			pcs3_3: ethernet-phy at 3 {
+			pcs3_3: ethernet-pcs at 3 {
+				compatible = "fsl,lynx-pcs";
 				reg = <3>;
 			};
 		};
@@ -983,19 +989,23 @@ pcs_mdio7: mdio at 8c1f000 {
 			#size-cells = <0>;
 			status = "disabled";
 
-			pcs7_0: ethernet-phy at 0 {
+			pcs7_0: ethernet-pcs at 0 {
+				compatible = "fsl,lynx-pcs";
 				reg = <0>;
 			};
 
-			pcs7_1: ethernet-phy at 1 {
+			pcs7_1: ethernet-pcs at 1 {
+				compatible = "fsl,lynx-pcs";
 				reg = <1>;
 			};
 
-			pcs7_2: ethernet-phy at 2 {
+			pcs7_2: ethernet-pcs at 2 {
+				compatible = "fsl,lynx-pcs";
 				reg = <2>;
 			};
 
-			pcs7_3: ethernet-phy at 3 {
+			pcs7_3: ethernet-pcs at 3 {
+				compatible = "fsl,lynx-pcs";
 				reg = <3>;
 			};
 		};
-- 
2.35.1.1320.gc452695387.dirty