[PATCH 2/6] ARM: dts: imx6dl-yapp4: Change LED channel names according to dt-binding

[Shawn Guo]

On Fri, Feb 10, 2023 at 04:48:51PM +0100, Michal Vokáč wrote:
> The lp55xx LED controller binding was converted to schema and dtbs_check
> now complains:
> 
>   led-controller at 30: 'chan at 0', 'chan at 1', 'chan at 2' do not match any of the regexes
> 
> Use correct names to fix that.
> 
> Signed-off-by: Michal Vokáč <michal.vokac at ysoft.com>

It's been address as part of this commit:

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=4b0d1f2738899dbcc7a026d826373530019aa31b

Shawn

> ---
>  arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
> index 52162e8c7274..aacbf317feea 100644
> --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
> +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
> @@ -274,7 +274,7 @@ leds: led-controller at 30 {
>  		#address-cells = <1>;
>  		#size-cells = <0>;
>  
> -		chan at 0 {
> +		led at 0 {
>  			chan-name = "R";
>  			led-cur = /bits/ 8 <0x20>;
>  			max-cur = /bits/ 8 <0x60>;
> @@ -282,7 +282,7 @@ chan at 0 {
>  			color = <LED_COLOR_ID_RED>;
>  		};
>  
> -		chan at 1 {
> +		led at 1 {
>  			chan-name = "G";
>  			led-cur = /bits/ 8 <0x20>;
>  			max-cur = /bits/ 8 <0x60>;
> @@ -290,7 +290,7 @@ chan at 1 {
>  			color = <LED_COLOR_ID_GREEN>;
>  		};
>  
> -		chan at 2 {
> +		led at 2 {
>  			chan-name = "B";
>  			led-cur = /bits/ 8 <0x20>;
>  			max-cur = /bits/ 8 <0x60>;
> -- 
> 2.25.1
>