[PATCH v2 4/4] serial: qcom_geni: Use devm_krealloc_array

[Jonathan Cameron]

On Thu,  9 Mar 2023 15:03:33 +0000
James Clark <james.clark at arm.com> wrote:

> Now that it exists, use it instead of doing the multiplication manually.
> 
> Signed-off-by: James Clark <james.clark at arm.com>

Hmm. I've stared at the users of this for a bit, and it's not actually obvious
that it's being used as an array of u32.  The only typed user of this is as
the 2nd parameter of  
tty_insert_flip_string() which is an unsigned char *

I wonder if that sizeof(u32) isn't a 'correct' description of where the 4 is coming
from even if it has the right value?  Perhaps the fifo depth is just a multiple of 4?

Jonathan



> ---
>  drivers/tty/serial/qcom_geni_serial.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
> index d69592e5e2ec..23fc33d182ac 100644
> --- a/drivers/tty/serial/qcom_geni_serial.c
> +++ b/drivers/tty/serial/qcom_geni_serial.c
> @@ -1056,9 +1056,9 @@ static int setup_fifos(struct qcom_geni_serial_port *port)
>  		(port->tx_fifo_depth * port->tx_fifo_width) / BITS_PER_BYTE;
>  
>  	if (port->rx_buf && (old_rx_fifo_depth != port->rx_fifo_depth) && port->rx_fifo_depth) {
> -		port->rx_buf = devm_krealloc(uport->dev, port->rx_buf,
> -					     port->rx_fifo_depth * sizeof(u32),
> -					     GFP_KERNEL);
> +		port->rx_buf = devm_krealloc_array(uport->dev, port->rx_buf,
> +						   port->rx_fifo_depth, sizeof(u32),
> +						   GFP_KERNEL);
>  		if (!port->rx_buf)
>  			return -ENOMEM;
>  	}