Aw: Re: [PATCH net-next v12 08/18] net: ethernet: mtk_eth_soc: fix 1000Base-X and 2500Base-X modes

[Frank Wunderlich]

> Gesendet: Samstag, 11. März 2023 um 13:05 Uhr
> Von: "Frank Wunderlich" <frank-w at public-files.de>
> > Gesendet: Mittwoch, 08. März 2023 um 16:24 Uhr
> > Von: "Russell King (Oracle)" <linux at armlinux.org.uk>
> > > > It would be nice to add these to my database - please send me the
> > > > output of ethtool -m $iface raw on > foo.bin for each module.
> > 
> > so if you can do that for me, then I can see whether it's likely that
> > the patches that are already in mainline will do anything to solve
> > the workaround you've had to add for the hw signals.
> 
> i got the 2.5G copper sfps, and tried them...they work well with the v12 (including this patch), but not in v13...
> 
> i dumped the eeprom like you mention for your database:
> 
> $ hexdump -C 2g5_sfp.bin 
> 00000000  03 04 07 00 01 00 00 00  00 02 00 05 19 00 00 00  |................|
> 00000010  1e 14 00 00 4f 45 4d 20  20 20 20 20 20 20 20 20  |....OEM         |
> 00000020  20 20 20 20 00 00 00 00  53 46 50 2d 32 2e 35 47  |    ....SFP-2.5G|
> 00000030  2d 54 20 20 20 20 20 20  31 2e 30 20 03 52 00 19  |-T      1.0 .R..|
> 00000040  00 1a 00 00 53 4b 32 33  30 31 31 31 30 30 30 38  |....SK2301110008|
> 00000050  20 20 20 20 32 33 30 31  31 30 20 20 68 f0 01 e8  |    230110  h...|
> 00000060  00 00 11 37 4f 7a dc ff  3d c0 6e 74 9b 7c 06 ca  |...7Oz..=.nt.|..|
> 00000070  e1 d0 f9 00 00 00 00 00  00 00 00 00 08 f0 fc 64  |...............d|
> 00000080  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
> *
> 00000100  5f 00 ce 00 5a 00 d3 00  8c a0 75 30 88 b8 79 18  |_...Z.....u0..y.|
> 00000110  1d 4c 01 f4 19 64 03 e8  4d f0 06 30 3d e8 06 f2  |.L...d..M..0=...|
> 00000120  2b d4 00 c7 27 10 00 df  00 00 00 00 00 00 00 00  |+...'...........|
> 00000130  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
> 00000140  00 00 00 00 3f 80 00 00  00 00 00 00 01 00 00 00  |....?...........|
> 00000150  01 00 00 00 01 00 00 00  01 00 00 00 00 00 00 f1  |................|
> 00000160  29 1a 82 41 0b b8 13 88  0f a0 ff ff ff ff 80 ff  |)..A............|
> 00000170  00 00 ff ff 00 00 ff ff  04 ff ff ff ff ff ff 00  |................|
> 00000180  43 4e 53 38 54 55 54 41  41 43 33 30 2d 31 34 31  |CNS8TUTAAC30-141|
> 00000190  30 2d 30 34 56 30 34 20  49 fb 46 00 00 00 00 29  |0-04V04 I.F....)|
> 000001a0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
> 000001b0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 aa aa  |................|
> 000001c0  47 4c 43 2d 54 20 20 20  20 20 20 20 20 20 20 20  |GLC-T           |
> 000001d0  20 20 20 20 20 20 20 20  20 20 20 20 20 20 20 97  |               .|
> 000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
> 000001f0  00 00 00 00 00 00 00 00  00 40 00 40 00 00 00 00  |......... at .@....|
> 
> how can we add a quirk to support this?

tried to add the quirk like this onto v13

--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -403,6 +403,8 @@ static const struct sfp_quirk sfp_quirks[] = {
        SFP_QUIRK_F("OEM", "RTSFP-10G", sfp_fixup_rollball_cc),
        SFP_QUIRK_F("Turris", "RTSFP-10", sfp_fixup_rollball),
        SFP_QUIRK_F("Turris", "RTSFP-10G", sfp_fixup_rollball),
+
+       SFP_QUIRK_M("OEM", "SFP-2.5G-T", sfp_quirk_2500basex),
 };

but still no link...

how can i verify the quirk was applied? see only this in dmesg:

[    2.192274] sfp sfp-1: module OEM              SFP-2.5G-T       rev 1.0  sn SK2301110008     dc 230110  

also tried to force speed (module should support 100/1000/2500), but it seems i can set speed option only on
gmac (eth1) and not on the sfp (phy).

i guess between mac and sfp speed is always 2500base-X and after the phy (if there is any) the link speed is
maybe different.

regards Frank