[PATCH] ARM: dts: ixp4xx: use "okay" for status
Linus Walleij
linus.walleij at linaro.org
Fri Mar 10 15:14:20 PST 2023
From: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
"okay" over "ok" is preferred for status property.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
Link: https://lore.kernel.org/r/20230127101832.93789-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
SoC folks: please apply this directly to the appropriate
branch for v6.4, I do not plan to send more IXP4xx changes
right now.
---
arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts | 6 +++---
arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts | 6 +++---
arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts | 2 +-
arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts | 6 +++---
arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts | 6 +++---
arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts | 6 +++---
arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts | 6 +++---
arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts | 4 ++--
arch/arm/boot/dts/intel-ixp42x-ixdp425.dts | 4 ++--
arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts | 6 +++---
arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts | 4 ++--
arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts | 6 +++---
arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts | 4 ++--
arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts | 2 +-
arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts | 6 +++---
arch/arm/boot/dts/intel-ixp43x-kixrp435.dts | 4 ++--
arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi | 2 +-
17 files changed, 40 insertions(+), 40 deletions(-)
diff --git a/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts b/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts
index bd4230d7dac9..765ab36e6f0c 100644
--- a/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts
@@ -56,7 +56,7 @@ partitions {
};
pci at c0000000 {
- status = "ok";
+ status = "okay";
/*
* Taken from Coyote PCI boardfile.
@@ -80,7 +80,7 @@ pci at c0000000 {
/* EthB */
ethernet at c8009000 {
- status = "ok";
+ status = "okay";
queue-rx = <&qmgr 3>;
queue-txready = <&qmgr 20>;
phy-mode = "rgmii";
@@ -102,7 +102,7 @@ phy5: ethernet-phy at 5 {
/* EthC */
ethernet at c800a000 {
- status = "ok";
+ status = "okay";
queue-rx = <&qmgr 4>;
queue-txready = <&qmgr 21>;
phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts b/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts
index 92b987bc3f99..6f5b4e4eb1cc 100644
--- a/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts
@@ -112,7 +112,7 @@ watchdog at 5,0 {
};
pci at c0000000 {
- status = "ok";
+ status = "okay";
/*
* Taken from Vulcan PCI boardfile.
@@ -137,7 +137,7 @@ pci at c0000000 {
/* EthB */
ethernet at c8009000 {
- status = "ok";
+ status = "okay";
queue-rx = <&qmgr 3>;
queue-txready = <&qmgr 20>;
phy-mode = "rgmii";
@@ -159,7 +159,7 @@ phy1: ethernet-phy at 1 {
/* EthC */
ethernet at c800a000 {
- status = "ok";
+ status = "okay";
queue-rx = <&qmgr 4>;
queue-txready = <&qmgr 21>;
phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts b/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts
index 5ab09fb10dae..b9d46eb06507 100644
--- a/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts
@@ -122,7 +122,7 @@ partitions {
};
pci at c0000000 {
- status = "ok";
+ status = "okay";
/*
* Taken from DSM-G600 PCI boardfile (dsmg600-pci.c)
diff --git a/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts b/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts
index b740403b05a9..5a5e16cc7335 100644
--- a/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts
@@ -159,7 +159,7 @@ led at 0,5 {
};
pci at c0000000 {
- status = "ok";
+ status = "okay";
/*
* Written based on the FSG-3 PCI boardfile.
@@ -187,7 +187,7 @@ pci at c0000000 {
/* EthB */
ethernet at c8009000 {
- status = "ok";
+ status = "okay";
queue-rx = <&qmgr 3>;
queue-txready = <&qmgr 20>;
phy-mode = "rgmii";
@@ -209,7 +209,7 @@ phy5: ethernet-phy at 5 {
/* EthC */
ethernet at c800a000 {
- status = "ok";
+ status = "okay";
queue-rx = <&qmgr 4>;
queue-txready = <&qmgr 21>;
phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts b/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts
index b7cbc90e1c18..4d70f6afd13a 100644
--- a/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts
@@ -53,7 +53,7 @@ partitions {
};
pci at c0000000 {
- status = "ok";
+ status = "okay";
/*
* Taken from Gateway 7001 PCI boardfile (gateway7001-pci.c)
@@ -74,7 +74,7 @@ pci at c0000000 {
};
ethernet at c8009000 {
- status = "ok";
+ status = "okay";
queue-rx = <&qmgr 3>;
queue-txready = <&qmgr 20>;
phy-mode = "rgmii";
@@ -91,7 +91,7 @@ phy1: ethernet-phy at 1 {
};
ethernet at c800a000 {
- status = "ok";
+ status = "okay";
queue-rx = <&qmgr 4>;
queue-txready = <&qmgr 21>;
phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts b/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts
index a5943f51e8c2..97e3f25bb210 100644
--- a/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts
@@ -108,7 +108,7 @@ ide at 1,0 {
};
pci at c0000000 {
- status = "ok";
+ status = "okay";
/*
* Taken from Avila PCI boardfile.
@@ -142,7 +142,7 @@ pci at c0000000 {
/* EthB */
ethernet at c8009000 {
- status = "ok";
+ status = "okay";
queue-rx = <&qmgr 3>;
queue-txready = <&qmgr 20>;
phy-mode = "rgmii";
@@ -164,7 +164,7 @@ phy1: ethernet-phy at 1 {
/* EthC */
ethernet at c800a000 {
- status = "ok";
+ status = "okay";
queue-rx = <&qmgr 4>;
queue-txready = <&qmgr 21>;
phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts b/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts
index f80388b17a9e..9ec0169bacf8 100644
--- a/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts
@@ -82,7 +82,7 @@ partitions {
};
pci at c0000000 {
- status = "ok";
+ status = "okay";
/*
* The device has 4 slots (IDSEL) with one dedicated IRQ per slot.
@@ -148,7 +148,7 @@ hss at 1 {
/* EthB */
ethernet at c8009000 {
- status = "ok";
+ status = "okay";
queue-rx = <&qmgr 3>;
queue-txready = <&qmgr 32>;
phy-mode = "rgmii";
@@ -170,7 +170,7 @@ phy1: ethernet-phy at 1 {
/* EthC */
ethernet at c800a000 {
- status = "ok";
+ status = "okay";
queue-rx = <&qmgr 4>;
queue-txready = <&qmgr 33>;
phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts b/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts
index cbc87b344f6a..8da6823e1dbe 100644
--- a/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts
@@ -109,7 +109,7 @@ partitions {
};
pci at c0000000 {
- status = "ok";
+ status = "okay";
/*
* Taken from NAS 100D PCI boardfile (nas100d-pci.c)
@@ -129,7 +129,7 @@ pci at c0000000 {
};
ethernet at c8009000 {
- status = "ok";
+ status = "okay";
queue-rx = <&qmgr 3>;
queue-txready = <&qmgr 20>;
phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts b/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts
index beaadda4685f..194945748dc3 100644
--- a/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts
@@ -40,7 +40,7 @@ partitions {
/* EthB */
ethernet at c8009000 {
- status = "ok";
+ status = "okay";
queue-rx = <&qmgr 3>;
queue-txready = <&qmgr 20>;
phy-mode = "rgmii";
@@ -62,7 +62,7 @@ phy1: ethernet-phy at 1 {
/* EthC */
ethernet at c800a000 {
- status = "ok";
+ status = "okay";
queue-rx = <&qmgr 4>;
queue-txready = <&qmgr 21>;
phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts b/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts
index f17cab12a64b..7011fea6205b 100644
--- a/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts
@@ -61,7 +61,7 @@ partitions {
};
pci at c0000000 {
- status = "ok";
+ status = "okay";
/*
* Taken from IXDPG425 PCI boardfile.
@@ -95,7 +95,7 @@ pci at c0000000 {
/* EthB */
ethernet at c8009000 {
- status = "ok";
+ status = "okay";
queue-rx = <&qmgr 3>;
queue-txready = <&qmgr 20>;
phy-mode = "rgmii";
@@ -117,7 +117,7 @@ phy5: ethernet-phy at 5 {
/* EthC */
ethernet at c800a000 {
- status = "ok";
+ status = "okay";
queue-rx = <&qmgr 4>;
queue-txready = <&qmgr 21>;
phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts
index 547098069814..39a1dd17e88b 100644
--- a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts
@@ -118,7 +118,7 @@ partitions {
};
pci at c0000000 {
- status = "ok";
+ status = "okay";
/*
* Taken from NSLU2 PCI boardfile, INT A, B, C swizzled D constant
@@ -145,7 +145,7 @@ pci at c0000000 {
};
ethernet at c8009000 {
- status = "ok";
+ status = "okay";
queue-rx = <&qmgr 3>;
queue-txready = <&qmgr 20>;
phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts
index 5e7e31b74b04..4aba9e0214a0 100644
--- a/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts
@@ -117,7 +117,7 @@ partition at 240000 {
};
pci at c0000000 {
- status = "ok";
+ status = "okay";
/*
* We have up to 2 slots (IDSEL) with 2 swizzled IRQs.
@@ -141,7 +141,7 @@ pci at c0000000 {
* Do we need a new binding and property for this?
*/
ethernet at c8009000 {
- status = "ok";
+ status = "okay";
queue-rx = <&qmgr 3>;
queue-txready = <&qmgr 20>;
phy-mode = "rgmii";
@@ -165,7 +165,7 @@ phy5: ethernet-phy at 5 {
/* EthC - connected to KS8995 switch port 5 */
ethernet at c800a000 {
- status = "ok";
+ status = "okay";
queue-rx = <&qmgr 4>;
queue-txready = <&qmgr 21>;
phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts b/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts
index df2ca6d95ee5..19d56e9aec9d 100644
--- a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts
@@ -54,7 +54,7 @@ partitions {
};
pci at c0000000 {
- status = "ok";
+ status = "okay";
/*
* Taken from WG302 v2 PCI boardfile (wg302v2-pci.c)
@@ -77,7 +77,7 @@ pci at c0000000 {
};
ethernet at c8009000 {
- status = "ok";
+ status = "okay";
queue-rx = <&qmgr 3>;
queue-txready = <&qmgr 20>;
phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts b/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts
index b444003c10e1..c550c421b659 100644
--- a/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts
@@ -79,7 +79,7 @@ partition at fff000 {
/* LAN port */
ethernet at c8009000 {
- status = "ok";
+ status = "okay";
queue-rx = <&qmgr 3>;
queue-txready = <&qmgr 20>;
phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts
index cf4010d60187..1db849515f9e 100644
--- a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts
+++ b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts
@@ -121,7 +121,7 @@ ide at 3,0 {
};
pci at c0000000 {
- status = "ok";
+ status = "okay";
/*
* In the boardfile for the Cambria from OpenWRT the interrupts
@@ -167,7 +167,7 @@ pci at c0000000 {
};
ethernet at c800a000 {
- status = "ok";
+ status = "okay";
queue-rx = <&qmgr 4>;
queue-txready = <&qmgr 21>;
phy-mode = "rgmii";
@@ -188,7 +188,7 @@ phy2: ethernet-phy at 2 {
};
ethernet at c800c000 {
- status = "ok";
+ status = "okay";
queue-rx = <&qmgr 2>;
queue-txready = <&qmgr 19>;
phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts b/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts
index 3d7cfa1a5ed4..4703a8b24765 100644
--- a/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts
+++ b/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts
@@ -36,7 +36,7 @@ partitions {
/* CHECKME: ethernet set-up taken from Gateworks Cambria */
ethernet at c800a000 {
- status = "ok";
+ status = "okay";
queue-rx = <&qmgr 4>;
queue-txready = <&qmgr 21>;
phy-mode = "rgmii";
@@ -57,7 +57,7 @@ phy2: ethernet-phy at 2 {
};
ethernet at c800c000 {
- status = "ok";
+ status = "okay";
queue-rx = <&qmgr 2>;
queue-txready = <&qmgr 19>;
phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi b/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi
index 146352ba848b..31c0a69771c4 100644
--- a/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi
+++ b/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi
@@ -99,7 +99,7 @@ fs at 800000 {
};
pci at c0000000 {
- status = "ok";
+ status = "okay";
/*
* Taken from IXDP425 PCI boardfile.
--
2.39.1
More information about the linux-arm-kernel
mailing list