[PATCH] thermal: Use of_property_present() for testing DT property presence

Rob Herring robh at kernel.org
Fri Mar 10 06:47:26 PST 2023


It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.

Signed-off-by: Rob Herring <robh at kernel.org>
---
 drivers/thermal/cpufreq_cooling.c                  | 2 +-
 drivers/thermal/imx8mm_thermal.c                   | 2 +-
 drivers/thermal/imx_thermal.c                      | 4 ++--
 drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 2 +-
 4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/thermal/cpufreq_cooling.c b/drivers/thermal/cpufreq_cooling.c
index 9f8b438fcf8f..4608555b7ec3 100644
--- a/drivers/thermal/cpufreq_cooling.c
+++ b/drivers/thermal/cpufreq_cooling.c
@@ -633,7 +633,7 @@ of_cpufreq_cooling_register(struct cpufreq_policy *policy)
 		return NULL;
 	}
 
-	if (of_find_property(np, "#cooling-cells", NULL)) {
+	if (of_property_present(np, "#cooling-cells")) {
 		struct em_perf_domain *em = em_cpu_get(policy->cpu);
 
 		cdev = __cpufreq_cooling_register(np, policy, em);
diff --git a/drivers/thermal/imx8mm_thermal.c b/drivers/thermal/imx8mm_thermal.c
index 72b5d6f319c1..334ce8e9830b 100644
--- a/drivers/thermal/imx8mm_thermal.c
+++ b/drivers/thermal/imx8mm_thermal.c
@@ -282,7 +282,7 @@ static int imx8mm_tmu_probe_set_calib(struct platform_device *pdev,
 	 * strongly recommended to update such old DTs to get correct
 	 * temperature compensation values for each SoC.
 	 */
-	if (!of_find_property(pdev->dev.of_node, "nvmem-cells", NULL)) {
+	if (!of_property_present(pdev->dev.of_node, "nvmem-cells")) {
 		dev_warn(dev,
 			 "No OCOTP nvmem reference found, SoC-specific calibration not loaded. Please update your DT.\n");
 		return 0;
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index fb0d5cab70af..77d6567a3f47 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -594,7 +594,7 @@ static int imx_thermal_register_legacy_cooling(struct imx_thermal_data *data)
 
 	np = of_get_cpu_node(data->policy->cpu, NULL);
 
-	if (!np || !of_find_property(np, "#cooling-cells", NULL)) {
+	if (!np || !of_property_present(np, "#cooling-cells")) {
 		data->cdev = cpufreq_cooling_register(data->policy);
 		if (IS_ERR(data->cdev)) {
 			ret = PTR_ERR(data->cdev);
@@ -671,7 +671,7 @@ static int imx_thermal_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, data);
 
-	if (of_find_property(pdev->dev.of_node, "nvmem-cells", NULL)) {
+	if (of_property_present(pdev->dev.of_node, "nvmem-cells")) {
 		ret = imx_init_from_nvmem_cells(pdev);
 		if (ret)
 			return dev_err_probe(&pdev->dev, ret,
diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
index 8a9055bd376e..dace6591220e 100644
--- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
@@ -223,7 +223,7 @@ int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id)
 	 * using DT, then it must be aware that the cooling device
 	 * loading has to happen via cpufreq driver.
 	 */
-	if (of_find_property(np, "#thermal-sensor-cells", NULL))
+	if (of_property_present(np, "#thermal-sensor-cells"))
 		return 0;
 
 	data = ti_bandgap_get_sensor_data(bgp, id);
-- 
2.39.2




More information about the linux-arm-kernel mailing list