[PATCH] dt-bindings: pinctrl: k3: Introduce debounce select mux macros

[Linus Walleij]

On Fri, Mar 10, 2023 at 1:43 AM Nishanth Menon <nm at ti.com> wrote:
> On 15:03-20230309, Linus Walleij wrote:
> > On Wed, Mar 8, 2023 at 9:43 AM Nishanth Menon <nm at ti.com> wrote:
> >
> > > Introduce the debounce select mux macros to allow folks to setup
> > > debounce configuration for pins. Each configuration selected maps
> > > to a specific timing register as documented in appropriate Technical
> > > Reference Manual (example:[1]).
> > >
> > > [1] AM625x TRM (section 6.1.2.2): https://www.ti.com/lit/pdf/spruiv7
> > > Signed-off-by: Nishanth Menon <nm at ti.com>
> >
> > Patch applied.
> >
> > Consider doing what Krzysztof recommends: move thes <dt-bindings/*.h>
> > down to the arch where you're using it and have them as .dtsi files instead
> > or something.
>
> Yep, that sounds like a better idea. If you are ok to drop this
> patch, then lets do the cleanup first and move the pinctrl to something like
> arch/arm64/boot/dts/ti/k3-pinctrl.h

OK let's proceed like that, I dropped it!

Yours,
Linus Walleij