[PATCH v1 13/14] arm64: dts: imx8mq-librem5: Reduce I2C frequency to 384kHz

[Martin Kepplinger]

From: Sebastian Krzyszkowiak <sebastian.krzyszkowiak at puri.sm>

According to imx8mq errata (ERR007805):

> To meet the clock low period requirement in fast speed mode,
> SCL must be configured to 384KHz or less.

Note that the imx i2c driver already implements this erratum and works
around it. This is only for the description to reflect reality.

Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak at puri.sm>
Signed-off-by: Martin Kepplinger <martin.kepplinger at puri.sm>
---
 arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index 7e70663cffa30..35bde8d41e8e7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -778,7 +778,7 @@ MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0x1f
 };
 
 &i2c1 {
-	clock-frequency = <387000>;
+	clock-frequency = <384000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
@@ -976,7 +976,7 @@ rtc at 68 {
 };
 
 &i2c2 {
-	clock-frequency = <387000>;
+	clock-frequency = <384000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
@@ -1025,7 +1025,7 @@ accel_gyro: accel-gyro at 6a	{
 };
 
 &i2c3 {
-	clock-frequency = <387000>;
+	clock-frequency = <384000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
@@ -1115,7 +1115,7 @@ touchscreen at 38 {
 };
 
 &i2c4 {
-	clock-frequency = <387000>;
+	clock-frequency = <384000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c4>;
 	status = "okay";
-- 
2.30.2