[PATCH 1/3] ARM: dts: armadillo800eva: Add I2C EEPROM for MAC address

[Geert Uytterhoeven]

Add a device node for the M24C01 I2C EEPROM which serves as external
storage for the Ethernet MAC address.

While at it, restore sort order (by unit address) of the I2C devices.

Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
 arch/arm/boot/dts/r8a7740-armadillo800eva.dts | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
index 76f04011870cc571..48b678a6c5cb92e5 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -210,6 +210,19 @@ &cmt1 {
 
 &i2c0 {
 	status = "okay";
+
+	wm8978: codec at 1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8978";
+		reg = <0x1a>;
+	};
+
+	eeprom at 50 {
+		compatible = "st,24c01", "atmel,24c01";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
 	touchscreen at 55 {
 		compatible = "sitronix,st1232";
 		reg = <0x55>;
@@ -219,12 +232,6 @@ touchscreen at 55 {
 		pinctrl-names = "default";
 		gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
 	};
-
-	wm8978: codec at 1a {
-		#sound-dai-cells = <0>;
-		compatible = "wlf,wm8978";
-		reg = <0x1a>;
-	};
 };
 
 &i2c2 {
-- 
2.34.1