[EXTERNAL] Re: [PATCH v5 1/2] dt-bindings: net: Add ICSSG Ethernet

Md Danish Anwar a0501179 at ti.com
Thu Mar 9 03:44:41 PST 2023


Hi Krzysztof,

On 07/03/23 14:28, Krzysztof Kozlowski wrote:
> On 07/03/2023 05:57, Md Danish Anwar wrote:
>>>> +allOf:
>>>> +  - $ref: /schemas/remoteproc/ti,pru-consumer.yaml#
>>>> +
>>>> +properties:
>>>> +  compatible:
>>>> +    enum:
>>>> +      - ti,am654-icssg-prueth  # for AM65x SoC family
>>>> +
>>>> +  ti,sram:
>>>> +    $ref: /schemas/types.yaml#/definitions/phandle
>>>> +    description:
>>>> +      phandle to MSMC SRAM node
>>>
>>> I believe we have a standard 'sram' property to point to SRAM nodes 
>>> assuming this is just mmio-sram or similar.
>>>
>>
>> Yes, we have standard 'sram' property but Krzysztof had asked me to make the
>> sram property vendor specific in last revision of this series.
> 
> Sorry about that. I missed that we already have a 'sram'. The question
> remains whether this is a phandle to MMIO SRAM or similar (sram.yaml).
> 
> Best regards,
> Krzysztof
> 

The SRAM that we are using here is phandle to MMIO-SRAM only. In the example
section you can see, sram node points to msmc_ram (ti,sram = <&msmc_ram>;) And
msmc_ram has compatible as "mmio-sram" in k3-am65-main.dtsi [1].

	msmc_ram: sram at 70000000 {
		compatible = "mmio-sram";
		reg = <0x0 0x70000000 0x0 0x200000>;

So I can use 'sram' property as there is no need to make this as ti specific.
Let me know if it seems good to you.

[1]
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/ti/k3-am65-main.dtsi?h=v6.3-rc1#n11

-- 
Thanks and Regards,
Danish.



More information about the linux-arm-kernel mailing list