[PATCH 0/6] soc: samsung: pm_domains: Add Exynos850 support

[Marek Szyprowski]

Hi Sam,

On 09.03.2023 00:09, Sam Protsenko wrote:
> Power Domains in Exynos850 are not really different from other Exynos
> platforms. Enabling Exynos850 support in the PD driver is really just a
> matter of adding:
>
>      static const struct exynos_pm_domain_config exynos850_cfg = {
>          .local_pwr_cfg = 0x1,
>      };
>
> to the driver. But in the face of recent developments, e.g. this patch:
>
>      arm64: dts: exynos: move MIPI phy to PMU node in Exynos5433
>
> it looked logical to rework the PD driver a bit to support its nesting
> under the PMU node, while adding Exynos850 support to it. Initially I
> only wanted to add syscon regmap support via some dedicated property,
> but pulling PD nodes under the PMU syscon looks like more correct way.

Frankly speaking if you are changing this, you can go even further. 
Simply make PMU node a PM domain provider and specify the power domain 
as a phandle parameter. This is how it should have been done from the 
beginning, but for some unknown reasons wasn't. There is really no need 
to have a separate node for each power domain. This will also move 
implementation details to the PMU / power domain drivers and it will 
make it much easier to extend/modify it in the future. IMHO same applies 
for PHY nodes.


Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland