[PATCH v5 11/19] clk: mediatek: Add MT8188 vdecsys clock support

Garmin Chang (張家銘) Garmin.Chang at mediatek.com
Wed Mar 8 21:26:15 PST 2023


On Fri, 2023-02-03 at 15:17 +0800, Chen-Yu Tsai wrote:
> On Thu, Jan 19, 2023 at 8:49 PM Garmin.Chang <
> Garmin.Chang at mediatek.com> wrote:
> > 
> > Add MT8188 vdec clock controllers which provide clock gate
> > control for video decoder.
> > 
> > Signed-off-by: Garmin.Chang <Garmin.Chang at mediatek.com>
> > ---
> >  drivers/clk/mediatek/Makefile          |  2 +-
> >  drivers/clk/mediatek/clk-mt8188-vdec.c | 90
> > ++++++++++++++++++++++++++
> >  2 files changed, 91 insertions(+), 1 deletion(-)
> >  create mode 100644 drivers/clk/mediatek/clk-mt8188-vdec.c
> > 
> > diff --git a/drivers/clk/mediatek/Makefile
> > b/drivers/clk/mediatek/Makefile
> > index a0fd87a882b5..7d09e9fc6538 100644
> > --- a/drivers/clk/mediatek/Makefile
> > +++ b/drivers/clk/mediatek/Makefile
> > @@ -86,7 +86,7 @@ obj-$(CONFIG_COMMON_CLK_MT8186) += clk-mt8186-
> > mcu.o clk-mt8186-topckgen.o clk-mt
> >  obj-$(CONFIG_COMMON_CLK_MT8188) += clk-mt8188-apmixedsys.o clk-
> > mt8188-topckgen.o \
> >                                    clk-mt8188-peri_ao.o clk-mt8188-
> > infra_ao.o \
> >                                    clk-mt8188-cam.o clk-mt8188-
> > ccu.o clk-mt8188-img.o \
> > -                                  clk-mt8188-ipe.o clk-mt8188-
> > mfg.o
> > +                                  clk-mt8188-ipe.o clk-mt8188-
> > mfg.o clk-mt8188-vdec.o
> >  obj-$(CONFIG_COMMON_CLK_MT8192) += clk-mt8192.o
> >  obj-$(CONFIG_COMMON_CLK_MT8192_AUDSYS) += clk-mt8192-aud.o
> >  obj-$(CONFIG_COMMON_CLK_MT8192_CAMSYS) += clk-mt8192-cam.o
> > diff --git a/drivers/clk/mediatek/clk-mt8188-vdec.c
> > b/drivers/clk/mediatek/clk-mt8188-vdec.c
> > new file mode 100644
> > index 000000000000..e05a27957136
> > --- /dev/null
> > +++ b/drivers/clk/mediatek/clk-mt8188-vdec.c
> > @@ -0,0 +1,90 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +//
> > +// Copyright (c) 2022 MediaTek Inc.
> > +// Author: Garmin Chang <garmin.chang at mediatek.com>
> > +
> > +#include <linux/clk-provider.h>
> > +#include <linux/platform_device.h>
> > +#include <dt-bindings/clock/mediatek,mt8188-clk.h>
> > +
> > +#include "clk-gate.h"
> > +#include "clk-mtk.h"
> > +
> > +static const struct mtk_gate_regs vde0_cg_regs = {
> 
> Could you replace all instances of "vde" (both upper and lower case)
> with "vdec" to be consistent with usages elsewhere?

Thank you for your suggestions.
OK, I will modify this series in v6.
> 
> > +       .set_ofs = 0x0,
> > +       .clr_ofs = 0x4,
> > +       .sta_ofs = 0x0,
> > +};
> > +
> > +static const struct mtk_gate_regs vde1_cg_regs = {
> > +       .set_ofs = 0x200,
> > +       .clr_ofs = 0x204,
> > +       .sta_ofs = 0x200,
> > +};
> > +
> > +static const struct mtk_gate_regs vde2_cg_regs = {
> > +       .set_ofs = 0x8,
> > +       .clr_ofs = 0xc,
> > +       .sta_ofs = 0x8,
> > +};
> > +
> > +#define GATE_VDE0(_id, _name, _parent, _shift)                 \
> > +       GATE_MTK(_id, _name, _parent, &vde0_cg_regs, _shift,
> > &mtk_clk_gate_ops_setclr_inv)
> > +
> > +#define GATE_VDE1(_id, _name, _parent, _shift)                 \
> > +       GATE_MTK(_id, _name, _parent, &vde1_cg_regs, _shift,
> > &mtk_clk_gate_ops_setclr_inv)
> > +
> > +#define GATE_VDE2(_id, _name, _parent, _shift)                 \
> > +       GATE_MTK(_id, _name, _parent, &vde2_cg_regs, _shift,
> > &mtk_clk_gate_ops_setclr_inv)
> > +
> > +static const struct mtk_gate vde1_clks[] = {
> > +       /* VDE1_0 */
> > +       GATE_VDE0(CLK_VDE1_SOC_VDEC, "vde1_soc_vdec", "top_vdec",
> > 0),
> > +       GATE_VDE0(CLK_VDE1_SOC_VDEC_ACTIVE, "vde1_soc_vdec_active",
> > "top_vdec", 4),
> > +       GATE_VDE0(CLK_VDE1_SOC_VDEC_ENG, "vde1_soc_vdec_eng",
> > "top_vdec", 8),
> > +       /* VDE1_1 */
> > +       GATE_VDE1(CLK_VDE1_SOC_LAT, "vde1_soc_lat", "top_vdec", 0),
> > +       GATE_VDE1(CLK_VDE1_SOC_LAT_ACTIVE, "vde1_soc_lat_active",
> > "top_vdec", 4),
> > +       GATE_VDE1(CLK_VDE1_SOC_LAT_ENG, "vde1_soc_lat_eng",
> > "top_vdec", 8),
> > +       /* VDE12 */
> 
> Add an underscore like the above?
> 
> ChenYu
OK, I will add underscore in v6.
> 
> > +       GATE_VDE2(CLK_VDE1_SOC_LARB1, "vde1_soc_larb1", "top_vdec",
> > 0),
> > +};
> > +
> > +static const struct mtk_gate vde2_clks[] = {
> > +       /* VDE2_0 */
> > +       GATE_VDE0(CLK_VDE2_VDEC, "vde2_vdec", "top_vdec", 0),
> > +       GATE_VDE0(CLK_VDE2_VDEC_ACTIVE, "vde2_vdec_active",
> > "top_vdec", 4),
> > +       GATE_VDE0(CLK_VDE2_VDEC_ENG, "vde2_vdec_eng", "top_vdec",
> > 8),
> > +       /* VDE2_1 */
> > +       GATE_VDE1(CLK_VDE2_LAT, "vde2_lat", "top_vdec", 0),
> > +       /* VDE2_2 */
> > +       GATE_VDE2(CLK_VDE2_LARB1, "vde2_larb1", "top_vdec", 0),
> > +};
> > +
> > +static const struct mtk_clk_desc vde1_desc = {
> > +       .clks = vde1_clks,
> > +       .num_clks = ARRAY_SIZE(vde1_clks),
> > +};
> > +
> > +static const struct mtk_clk_desc vde2_desc = {
> > +       .clks = vde2_clks,
> > +       .num_clks = ARRAY_SIZE(vde2_clks),
> > +};
> > +
> > +static const struct of_device_id of_match_clk_mt8188_vde[] = {
> > +       { .compatible = "mediatek,mt8188-vdecsys-soc", .data =
> > &vde1_desc },
> > +       { .compatible = "mediatek,mt8188-vdecsys", .data =
> > &vde2_desc },
> > +       { /* sentinel */ }
> > +};
> > +
> > +static struct platform_driver clk_mt8188_vde_drv = {
> > +       .probe = mtk_clk_simple_probe,
> > +       .remove = mtk_clk_simple_remove,
> > +       .driver = {
> > +               .name = "clk-mt8188-vde",
> > +               .of_match_table = of_match_clk_mt8188_vde,
> > +       },
> > +};
> > +
> > +builtin_platform_driver(clk_mt8188_vde_drv);
> > +MODULE_LICENSE("GPL");
> > --
> > 2.18.0
> > 
> > 


More information about the linux-arm-kernel mailing list