[PATCH v17 RESEND 1/3] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support

[Lee Jones]

On Tue, 07 Mar 2023, ChiYuan Huang wrote:

> Hi, Lee:
>
> Thanks's for the reviewing.
> To prevent the misunderstanding, reply as below.
> No reply means will do.
>
> On Sun, Mar 05, 2023 at 08:55:33AM +0000, Lee Jones wrote:
> > On Thu, 23 Feb 2023, ChiaEn Wu wrote:
> >
> > > From: ChiYuan Huang <cy_huang at richtek.com>
> > >
> > > The MediaTek MT6370 is a highly-integrated smart power management IC,
> > > which includes a single cell Li-Ion/Li-Polymer switching battery
> > > charger, a USB Type-C & Power Delivery (PD) controller, dual
> > > Flash LED current sources, a RGB LED driver, a backlight WLED driver,
> > > a display bias driver and a general LDO for portable devices.
> > >
> > > Add support for the MediaTek MT6370 Current Sink Type LED Indicator
> > > driver. It can control four channels current-sink RGB LEDs with 3 modes:
> > > constant current, PWM, and breath mode.
> > >
> > > Acked-by: Jacek Anaszewski <jacek.anaszewski at gmail.com>
> > > Co-developed-by: Alice Chen <alice_chen at richtek.com>
> > > Signed-off-by: Alice Chen <alice_chen at richtek.com>
> > > Signed-off-by: ChiYuan Huang <cy_huang at richtek.com>
> > > Signed-off-by: ChiaEn Wu <chiaen_wu at richtek.com>
> > > ---
> > > v17
> > > - Update the year of Copyright from 2022 to 2023
> > >
> > > ---
> > >  drivers/leds/rgb/Kconfig           |   13 +
> > >  drivers/leds/rgb/Makefile          |    1 +
> > >  drivers/leds/rgb/leds-mt6370-rgb.c | 1009 ++++++++++++++++++++++++++++++++++++
> > >  3 files changed, 1023 insertions(+)
> > >  create mode 100644 drivers/leds/rgb/leds-mt6370-rgb.c

[...]

> > > +static int mt6370_gen_breath_pattern(struct mt6370_priv *priv,
> > > +				     struct led_pattern *pattern, u32 len,
> > > +				     u8 *pattern_val, u32 val_len)
> > > +{
> > > +	enum mt6370_led_ranges sel_range;
> > > +	struct led_pattern *curr;
> > > +	unsigned int sel;
> > > +	u32 val = 0;
> > > +	int i;
> > > +
> > > +	if (len < P_MAX_PATTERNS && val_len < P_MAX_PATTERNS / 2)
> > > +		return -EINVAL;
> > > +
> > > +	/*
> > > +	 * Pattern list
> > > +	 * tr1:	 byte 0, b'[7: 4]
> >
> > Perhaps this is standard formatting and I'm just not aware of it, but
> > the space is throwing me and making me think twice.  Does this mean bits
> > 7 through 4, so b'11110000?
> >
> Yes. like as you said. Sorry for the redudant space make you confused.
> I'm not sure whether it's a standard formating or not.
> Sometimes, in datasheet, we'll use this format to represent the bitfield for functions.
> Your format is also good for it.
> And which one is preferable?

Since neither of us are sure, just take the space out for now please.

> > > +	 * tr2:	 byte 0, b'[3: 0]
> > > +	 * tf1:	 byte 1, b'[7: 4]
> > > +	 * tf2:	 byte 1, b'[3: 0]
> > > +	 * ton:	 byte 2, b'[7: 4]
> > > +	 * toff: byte 2, b'[3: 0]
> > > +	 */
> > > +	for (i = 0; i < P_MAX_PATTERNS; i++) {
> > > +		curr = pattern + i;
> > > +
> > > +		sel_range = i == P_LED_TOFF ? R_LED_TOFF : R_LED_TRFON;
> > > +
> > > +		linear_range_get_selector_within(priv->ranges + sel_range,
> > > +						 curr->delta_t, &sel);
> > > +
> > > +		if (i % 2) {
> > > +			val |= sel;
> > > +		} else {
> > > +			val <<= 8;
> > > +			val |= sel << 4;
> > > +		}
> > > +	}

[...]

> > > +static int mt6370_led_register(struct device *dev, struct mt6370_led *led,
> > > +			       struct led_init_data *init_data)
> > > +{
> > > +	struct mt6370_priv *priv = led->priv;
> > > +	int ret;
> > > +
> > > +	if (led->index == MT6370_VIRTUAL_MULTICOLOR) {
> >
> > This too could be split into separate functions to tidy things up a
> > little.
> >
> Like as below?
>
> if (led->index == MT6370_VIRTUAL_MULTICOLOR)
>    return mt6370_multicolor_led_register(....)
>
> if (led->index == MT6370_LED_ISNK4) {
>     .....
> }
>
> ret = mt6370_init_isnk_default_state(...)

Yes, that kind of thing.

> Since the multilor case directly return from the sub-function, else can be removed.

> > > +		ret = mt6370_mc_brightness_set(&led->mc.led_cdev, 0);
> > > +		if (ret)
> > > +			return dev_err_probe(dev, ret, "Couldn't set multicolor brightness\n");
> > > +
> > > +		ret = devm_led_classdev_multicolor_register_ext(dev, &led->mc,
> > > +								init_data);
> > > +		if (ret)
> > > +			return dev_err_probe(dev, ret, "Couldn't register multicolor\n");
> > > +	} else {
> > > +		if (led->index == MT6370_LED_ISNK4) {
> > > +			ret = regmap_field_write(priv->fields[F_CHGIND_EN], 1);
> > > +			if (ret)
> > > +				return dev_err_probe(dev, ret, "Failed to set CHRIND to SW\n");
> > > +		}
> > > +
> > > +		ret = mt6370_isnk_init_default_state(led);
> > > +		if (ret)
> > > +			return dev_err_probe(dev, ret, "Failed to init %d isnk state\n",
> > > +					     led->index);
> > > +
> > > +		ret = devm_led_classdev_register_ext(dev, &led->isink,
> > > +						     init_data);
> > > +		if (ret)
> > > +			return dev_err_probe(dev, ret, "Couldn't register isink %d\n", led->index);
> > > +	}
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int mt6370_check_vendor_info(struct mt6370_priv *priv)
> > > +{
> > > +	unsigned int devinfo, vid;
> > > +	int ret;
> > > +
> > > +	ret = regmap_read(priv->regmap, MT6370_REG_DEV_INFO, &devinfo);
> > > +	if (ret)
> > > +		return ret;
> > > +
> > > +	vid = FIELD_GET(MT6370_VENID_MASK, devinfo);
> > > +	if (vid == 0x9 || vid == 0xb) {
> >
> > Are there nice human readable associates of these (vendor?) IDS?
> >
> For clearly understanding, I'll define these two as 'MT6372_VENDOR_ID' and 'MT6372C_VENDOR_ID'.

Much better, thank you.

--
Lee Jones [李琼斯]