[EXTERNAL] Re: [PATCH v3 4/6] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR

Roger Quadros rogerq at kernel.org
Wed Mar 8 03:15:24 PST 2023



On 08/03/2023 11:23, Md Danish Anwar wrote:
> Hi Roger,
> 
> On 08/03/23 14:04, Roger Quadros wrote:
>> Hi Danish,
>>
>> On 06/03/2023 13:09, MD Danish Anwar wrote:
>>> From: Suman Anna <s-anna at ti.com>
>>>
>>> The PRUSS CFG module is represented as a syscon node and is currently
>>> managed by the PRUSS platform driver. Add easy accessor functions to set
>>> GPI mode, MII_RT event enable/disable and XFR (XIN XOUT) enable/disable
>>> to enable the PRUSS Ethernet usecase. These functions reuse the generic
>>> pruss_cfg_update() API function.
>>>
>>> Signed-off-by: Suman Anna <s-anna at ti.com>
>>> Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk at linaro.org>
>>> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk at linaro.org>
>>> Signed-off-by: Puranjay Mohan <p-mohan at ti.com>
>>> ---
>>>  include/linux/remoteproc/pruss.h | 55 ++++++++++++++++++++++++++++++++
>>>  1 file changed, 55 insertions(+)
>>>
>>> diff --git a/include/linux/remoteproc/pruss.h b/include/linux/remoteproc/pruss.h
>>> index d41bec448f06..7952f250301a 100644
>>> --- a/include/linux/remoteproc/pruss.h
>>> +++ b/include/linux/remoteproc/pruss.h
>>> @@ -240,4 +240,59 @@ static inline bool is_pru_rproc(struct device *dev)
>>>  	return true;
>>>  }
>>>  
>>> +/**
>>> + * pruss_cfg_gpimode() - set the GPI mode of the PRU
>>> + * @pruss: the pruss instance handle
>>> + * @pru_id: id of the PRU core within the PRUSS
>>> + * @mode: GPI mode to set
>>> + *
>>> + * Sets the GPI mode for a given PRU by programming the
>>> + * corresponding PRUSS_CFG_GPCFGx register
>>> + *
>>> + * Return: 0 on success, or an error code otherwise
>>> + */
>>> +static inline int pruss_cfg_gpimode(struct pruss *pruss,
>>> +				    enum pruss_pru_id pru_id,
>>> +				    enum pruss_gpi_mode mode)
>>> +{
>>> +	if (pru_id < 0 || pru_id >= PRUSS_NUM_PRUS)
>>> +		return -EINVAL;
>>> +
>>
>> Should we check for invalid gpi mode and error out if so?
>>
> Sure we can check for invalid gpi mode.
> 
> Does the below code snippet looks good to you?
> 
> 	if(mode < PRUSS_GPI_MODE_DIRECT || mode > PRUSS_GPI_MODE_MII)

How about?
	if (mode < 0 || mode > PRUSS_GPI_MODE_MAX)

> 		return -EINVAL;
> 
>>> +	return pruss_cfg_update(pruss, PRUSS_CFG_GPCFG(pru_id),
>>> +				PRUSS_GPCFG_PRU_GPI_MODE_MASK,
>>> +				mode << PRUSS_GPCFG_PRU_GPI_MODE_SHIFT);
>>> +}
>>> +
>>> +/**
>>> + * pruss_cfg_miirt_enable() - Enable/disable MII RT Events
>>> + * @pruss: the pruss instance
>>> + * @enable: enable/disable
>>> + *
>>> + * Enable/disable the MII RT Events for the PRUSS.
>>> + *
>>> + * Return: 0 on success, or an error code otherwise
>>> + */
>>> +static inline int pruss_cfg_miirt_enable(struct pruss *pruss, bool enable)
>>> +{
>>> +	u32 set = enable ? PRUSS_MII_RT_EVENT_EN : 0;
>>> +
>>> +	return pruss_cfg_update(pruss, PRUSS_CFG_MII_RT,
>>> +				PRUSS_MII_RT_EVENT_EN, set);
>>> +}
>>> +
>>> +/**
>>> + * pruss_cfg_xfr_enable() - Enable/disable XIN XOUT shift functionality
>>> + * @pruss: the pruss instance
>>> + * @enable: enable/disable
>>> + *
>>> + * Return: 0 on success, or an error code otherwise
>>> + */
>>> +static inline int pruss_cfg_xfr_enable(struct pruss *pruss, bool enable)
>>> +{
>>> +	u32 set = enable ? PRUSS_SPP_XFER_SHIFT_EN : 0;
>>> +
>>> +	return pruss_cfg_update(pruss, PRUSS_CFG_SPP,
>>> +				PRUSS_SPP_XFER_SHIFT_EN, set);
>>> +}
>>> +
>>>  #endif /* __LINUX_PRUSS_H */
>>

cheers,
-roger



More information about the linux-arm-kernel mailing list