[PATCH] arm64: dts: ti: k3-j721e-sk: Remove firmware-name override for R5F

[Andrew Davis]

The firmware name for this core should stay as the default name
"j7-main-r5f0_0-fw". This is expected to by a symlink to the actual
firmware file. If one wants to use a different firmware they should
change where the symlink points. This is usually achieved with
an update-alternative or other distro specific selection mechanisms.

The actual selection is policy and does not belong in DT.
Remove this name override.

Signed-off-by: Andrew Davis <afd at ti.com>
---
 arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index 4640d280c85c..f650a7fd66b4 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -687,10 +687,6 @@ &wkup_gpio1 {
 	status = "disabled";
 };
 
-&main_r5fss0_core0{
-	firmware-name = "pdk-ipc/ipc_echo_test_mcu2_0_release_strip.xer5f";
-};
-
 &usb_serdes_mux {
 	idle-states = <1>, <1>; /* USB0 to SERDES3, USB1 to SERDES2 */
 };
-- 
2.39.2