[PATCH v4 2/3] ARM: dts: ti: Add AM57xx GP EVM Rev A3 board support

[Andrew Davis]

The A3 revision of the AM57xx GP EVM has the same EVM feature set as the
original but is paired with an updated revision C BeagleBoard X15.

DT Overlays allow us to model this in the same way, we simply apply the
EVM overlay to the Rev C BeagleBoard to create the Rev A3 AM57xx GP EVM.

Signed-off-by: Andrew Davis <afd at ti.com>
---
 arch/arm/boot/dts/Makefile | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7f850cf5f063..c1297fd06d2a 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -995,11 +995,13 @@ dtb-$(CONFIG_SOC_OMAP5) += \
 	omap5-sbc-t54.dtb \
 	omap5-uevm.dtb
 am57xx-evm-dtbs := am57xx-beagle-x15.dtb am57xx-evm.dtbo
+am57xx-evm-reva3-dtbs := am57xx-beagle-x15-revc.dtb am57xx-evm.dtbo
 dtb-$(CONFIG_SOC_DRA7XX) += \
 	am57xx-beagle-x15.dtb \
 	am57xx-beagle-x15-revb1.dtb \
 	am57xx-beagle-x15-revc.dtb \
 	am57xx-evm.dtb \
+	am57xx-evm-reva3.dtb \
 	am5729-beagleboneai.dtb \
 	am57xx-cl-som-am57x.dtb \
 	am57xx-sbc-am57x.dtb \
-- 
2.39.2