[PATCH net-next v12 00/18] net: ethernet: mtk_eth_soc: various enhancements
Daniel Golle
daniel at makrotopia.org
Tue Mar 7 07:52:19 PST 2023
This series brings a variety of fixes and enhancements for mtk_eth_soc,
adds support for the MT7981 SoC and facilitates sharing the SGMII PCS
code between mtk_eth_soc and mt7530.
Also prepare support for MT7988 which has been done while net-next was
closed.
Note that this series depends on commit 697c3892d825
("regmap: apply reg_base and reg_downshift for single register ops") to
not break mt7530 pcs register access.
For SGMII and 1000Base-X mode to work well it also depends on commit
193250ace270 ("net: ethernet: mtk_eth_soc: fix RX data corruption issue")
which has already been merged via the net tree.
The whole series has been tested on MT7622+MT7531 (BPi-R64),
MT7623+MT7530 (BPi-R2), MT7981+GPY211 (GL.iNet GL-MT3000) and
MT7986+MT7531 (BPi-R3). On the BananaPi R3 a variete of SFP modules
have been tested, all of them (some SGMII with PHY, others 2500Base-X
or 1000Base-X without PHY) are working well now.
Changes since v11:
* remove patch "net: ethernet: mtk_eth_soc: fix RX data corruption issue"
as it has already been merged via net tree
* add commits fixing 1000Base-X and 2500Base-X modes after phylink_pcs
conversion
* completely remove mtk_sgmii.c as only about 20 lines were left in that
file
* Add commits from Lorenzo for MT7988 as requested by him
Changes since v10:
* improve mediatek,mt7981-eth dt-bindings
* use regmap_set_bits instead of regmap_update_bits where possible
* completely remove mtk_sgmii.c
* no need to keep struct mtk_sgmii either as it had only a single
element
Changes since v9:
* fix path in mediatek,sgmiisys dt-binding
Changes since v8:
* move mediatek,sgmiisys dt-bindings to correct net/pcs folder
* rebase on top of net-next/main so series applies cleanly again
Changes since v7:
* move mediatek,sgmiisys.yaml to more appropriate folder
* don't include <linux/phylink.h> twice in PCS driver, sort includes
Changes since v6:
* label MAC MCR bit 12 in 08/12, MediaTek replied explaining its function
Changes since v5:
* drop dev pointer also from struct mtk_sgmii, pass it as function
parameter instead
* address comments left for dt-bindings
* minor improvements to commit messages
Changes since v4:
* remove unused dev pointer in struct pcs_mtk_lynxi
* squash link timer check into correct follow-up patch
Changes since v3:
* remove unused #define's
* use BMCR_* instead of #define'ing our own constants
* return before changing registers in case of invalid link timer
Changes since v2:
* improve dt-bindings, convert sgmisys bindings to dt-schema yaml
* fix typo
Changes since v1:
* apply reverse xmas tree everywhere
* improve commit descriptions
* add dt binding documentation
* various small changes addressing all comments received for v1
Daniel Golle (13):
net: ethernet: mtk_eth_soc: add support for MT7981 SoC
dt-bindings: net: mediatek,net: add mt7981-eth binding
dt-bindings: arm: mediatek: sgmiisys: Convert to DT schema
dt-bindings: arm: mediatek: sgmiisys: add MT7981 SoC
net: ethernet: mtk_eth_soc: set MDIO bus clock frequency
net: ethernet: mtk_eth_soc: reset PCS state
net: ethernet: mtk_eth_soc: only write values if needed
net: ethernet: mtk_eth_soc: fix 1000Base-X and 2500Base-X modes
net: ethernet: mediatek: Fix SerDes link status if not in SGMII mode
net: ethernet: mtk_eth_soc: ppe: add support for flow accounting
net: pcs: add driver for MediaTek SGMII PCS
net: ethernet: mtk_eth_soc: switch to external PCS driver
net: dsa: mt7530: use external PCS driver
Lorenzo Bianconi (6):
net: ethernet: mtk_eth_soc: add MTK_NETSYS_V1 capability bit
net: ethernet: mtk_eth_soc: move MAX_DEVS in mtk_soc_data
net: ethernet: mtk_eth_soc: rely on num_devs and remove MTK_MAC_COUNT
net: ethernet: mtk_eth_soc: add MTK_NETSYS_V3 capability bit
net: ethernet: mtk_eth_soc: convert caps in mtk_soc_data struct to u64
net: ethernet: mtk_eth_soc: add support for MT7988 SoC
.../arm/mediatek/mediatek,sgmiisys.txt | 27 --
.../devicetree/bindings/net/mediatek,net.yaml | 53 ++-
.../bindings/net/pcs/mediatek,sgmiisys.yaml | 55 +++
MAINTAINERS | 7 +
drivers/net/dsa/Kconfig | 1 +
drivers/net/dsa/mt7530.c | 277 +++--------
drivers/net/dsa/mt7530.h | 47 +-
drivers/net/ethernet/mediatek/Kconfig | 2 +
drivers/net/ethernet/mediatek/Makefile | 2 +-
drivers/net/ethernet/mediatek/mtk_eth_path.c | 36 +-
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 448 +++++++++++++++---
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 301 ++++++++----
drivers/net/ethernet/mediatek/mtk_ppe.c | 114 ++++-
drivers/net/ethernet/mediatek/mtk_ppe.h | 25 +-
.../net/ethernet/mediatek/mtk_ppe_debugfs.c | 9 +-
.../net/ethernet/mediatek/mtk_ppe_offload.c | 8 +
drivers/net/ethernet/mediatek/mtk_ppe_regs.h | 14 +
drivers/net/ethernet/mediatek/mtk_sgmii.c | 203 --------
drivers/net/pcs/Kconfig | 7 +
drivers/net/pcs/Makefile | 1 +
drivers/net/pcs/pcs-mtk-lynxi.c | 308 ++++++++++++
include/linux/pcs/pcs-mtk-lynxi.h | 13 +
22 files changed, 1266 insertions(+), 692 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
create mode 100644 Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml
delete mode 100644 drivers/net/ethernet/mediatek/mtk_sgmii.c
create mode 100644 drivers/net/pcs/pcs-mtk-lynxi.c
create mode 100644 include/linux/pcs/pcs-mtk-lynxi.h
base-commit: 36e5e391a25af28dc1f4586f95d577b38ff4ed72
--
2.39.2
Daniel Golle (13):
net: ethernet: mtk_eth_soc: add support for MT7981 SoC
dt-bindings: net: mediatek,net: add mt7981-eth binding
dt-bindings: arm: mediatek: sgmiisys: Convert to DT schema
dt-bindings: arm: mediatek: sgmiisys: add MT7981 SoC
net: ethernet: mtk_eth_soc: set MDIO bus clock frequency
net: ethernet: mtk_eth_soc: reset PCS state
net: ethernet: mtk_eth_soc: only write values if needed
net: ethernet: mtk_eth_soc: fix 1000Base-X and 2500Base-X modes
net: ethernet: mtk_eth_soc: Fix link status for none-SGMII modes
net: ethernet: mtk_eth_soc: ppe: add support for flow accounting
net: pcs: add driver for MediaTek SGMII PCS
net: ethernet: mtk_eth_soc: switch to external PCS driver
net: dsa: mt7530: use external PCS driver
Lorenzo Bianconi (5):
net: ethernet: mtk_eth_soc: add MTK_NETSYS_V1 capability bit
net: ethernet: mtk_eth_soc: move MAX_DEVS in mtk_soc_data
net: ethernet: mtk_eth_soc: rely on num_devs and remove MTK_MAC_COUNT
net: ethernet: mtk_eth_soc: add MTK_NETSYS_V3 capability bit
net: ethernet: mtk_eth_soc: convert caps in mtk_soc_data struct to u64
.../arm/mediatek/mediatek,sgmiisys.txt | 27 --
.../devicetree/bindings/net/mediatek,net.yaml | 53 ++-
.../bindings/net/pcs/mediatek,sgmiisys.yaml | 55 +++
MAINTAINERS | 7 +
drivers/net/dsa/Kconfig | 1 +
drivers/net/dsa/mt7530.c | 277 ++++-----------
drivers/net/dsa/mt7530.h | 47 +--
drivers/net/ethernet/mediatek/Kconfig | 2 +
drivers/net/ethernet/mediatek/Makefile | 2 +-
drivers/net/ethernet/mediatek/mtk_eth_path.c | 36 +-
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 314 ++++++++++++++----
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 207 ++++++------
drivers/net/ethernet/mediatek/mtk_ppe.c | 114 ++++++-
drivers/net/ethernet/mediatek/mtk_ppe.h | 25 +-
.../net/ethernet/mediatek/mtk_ppe_debugfs.c | 9 +-
.../net/ethernet/mediatek/mtk_ppe_offload.c | 8 +
drivers/net/ethernet/mediatek/mtk_ppe_regs.h | 14 +
drivers/net/ethernet/mediatek/mtk_sgmii.c | 203 -----------
drivers/net/pcs/Kconfig | 7 +
drivers/net/pcs/Makefile | 1 +
drivers/net/pcs/pcs-mtk-lynxi.c | 308 +++++++++++++++++
include/linux/pcs/pcs-mtk-lynxi.h | 13 +
22 files changed, 1051 insertions(+), 679 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
create mode 100644 Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml
delete mode 100644 drivers/net/ethernet/mediatek/mtk_sgmii.c
create mode 100644 drivers/net/pcs/pcs-mtk-lynxi.c
create mode 100644 include/linux/pcs/pcs-mtk-lynxi.h
base-commit: 36e5e391a25af28dc1f4586f95d577b38ff4ed72
--
2.39.2
More information about the linux-arm-kernel
mailing list