[PATCH v7 04/10] powerpc/8xx: Use a larger CPM1 command check mask

[Herve Codina]

The CPM1 command mask is defined for use with the standard
CPM1 command register as described in the user's manual:
  0  |1        3|4    7|8   11|12      14| 15|
  RST|    -     |OPCODE|CH_NUM|     -    |FLG|

In the QMC extension the CPM1 command register is redefined
(QMC supplement user's manuel) with the following mapping:
  0  |1        3|4    7|8           13|14| 15|
  RST|QMC OPCODE|  1110|CHANNEL_NUMBER| -|FLG|

Extend the check command mask in order to support both the
standard CH_NUM field and the QMC extension CHANNEL_NUMBER
field.

Signed-off-by: Herve Codina <herve.codina at bootlin.com>
Acked-by: Christophe Leroy <christophe.leroy at csgroup.eu>
Acked-by: Michael Ellerman <mpe at ellerman.id.au>
---
 arch/powerpc/platforms/8xx/cpm1.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/8xx/cpm1.c b/arch/powerpc/platforms/8xx/cpm1.c
index 8ef1f4392086..6b828b9f90d9 100644
--- a/arch/powerpc/platforms/8xx/cpm1.c
+++ b/arch/powerpc/platforms/8xx/cpm1.c
@@ -100,7 +100,7 @@ int cpm_command(u32 command, u8 opcode)
 	int i, ret;
 	unsigned long flags;
 
-	if (command & 0xffffff0f)
+	if (command & 0xffffff03)
 		return -EINVAL;
 
 	spin_lock_irqsave(&cmd_lock, flags);
-- 
2.39.2