[PATCH v6 32/54] clk: mediatek: mt7986-apmixed: Use PLL_AO flag to set critical clock

[AngeloGioacchino Del Regno]

Instead of calling clk_prepare_enable() at probe time, add the PLL_AO
flag to CLK_APMIXED_ARMPLL clock: this will set CLK_IS_CRITICAL.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst at chromium.org>
Tested-by: Daniel Golle <daniel at makrotopia.org>
---
 drivers/clk/mediatek/clk-mt7986-apmixed.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/clk/mediatek/clk-mt7986-apmixed.c b/drivers/clk/mediatek/clk-mt7986-apmixed.c
index 62080ee4dbe3..227ca572056e 100644
--- a/drivers/clk/mediatek/clk-mt7986-apmixed.c
+++ b/drivers/clk/mediatek/clk-mt7986-apmixed.c
@@ -42,7 +42,7 @@
 		 "clkxtal")
 
 static const struct mtk_pll_data plls[] = {
-	PLL(CLK_APMIXED_ARMPLL, "armpll", 0x0200, 0x020C, 0x0, 0, 32,
+	PLL(CLK_APMIXED_ARMPLL, "armpll", 0x0200, 0x020C, 0x0, PLL_AO, 32,
 	    0x0200, 4, 0, 0x0204, 0),
 	PLL(CLK_APMIXED_NET2PLL, "net2pll", 0x0210, 0x021C, 0x0, 0, 32,
 	    0x0210, 4, 0, 0x0214, 0),
@@ -77,8 +77,6 @@ static int clk_mt7986_apmixed_probe(struct platform_device *pdev)
 
 	mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), clk_data);
 
-	clk_prepare_enable(clk_data->hws[CLK_APMIXED_ARMPLL]->clk);
-
 	r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
 	if (r) {
 		pr_err("%s(): could not register clock provider: %d\n",
-- 
2.39.2