[PATCH 25/30] pwm: sun4i: Convert to platform remove callback returning void

[Uwe Kleine-König]

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
 drivers/pwm/pwm-sun4i.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c
index b973da73e9ab..a8790a8fc53e 100644
--- a/drivers/pwm/pwm-sun4i.c
+++ b/drivers/pwm/pwm-sun4i.c
@@ -477,7 +477,7 @@ static int sun4i_pwm_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int sun4i_pwm_remove(struct platform_device *pdev)
+static void sun4i_pwm_remove(struct platform_device *pdev)
 {
 	struct sun4i_pwm_chip *sun4ichip = platform_get_drvdata(pdev);
 
@@ -485,8 +485,6 @@ static int sun4i_pwm_remove(struct platform_device *pdev)
 
 	clk_disable_unprepare(sun4ichip->bus_clk);
 	reset_control_assert(sun4ichip->rst);
-
-	return 0;
 }
 
 static struct platform_driver sun4i_pwm_driver = {
@@ -495,7 +493,7 @@ static struct platform_driver sun4i_pwm_driver = {
 		.of_match_table = sun4i_pwm_dt_ids,
 	},
 	.probe = sun4i_pwm_probe,
-	.remove = sun4i_pwm_remove,
+	.remove_new = sun4i_pwm_remove,
 };
 module_platform_driver(sun4i_pwm_driver);
 
-- 
2.39.1