[PATCH 3/4] arm64: dts: imx8mp: add HDMI display pipeline

[Luca Ceresoli]

Hello Lucas,

On Fri, 26 Aug 2022 21:29:31 +0200
Lucas Stach <l.stach at pengutronix.de> wrote:

> This adds the DT nodes for all the peripherals that make up the
> HDMI display pipeline.
> 
> Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
> ---
>  arch/arm64/boot/dts/freescale/imx8mp.dtsi | 83 +++++++++++++++++++++++
>  1 file changed, 83 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> index 71c2397bf7c2..254d610b93b7 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> @@ -1145,6 +1145,89 @@ irqsteer_hdmi: interrupt-controller at 32fc2000 {
>  				clock-names = "ipg";
>  				power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_IRQSTEER>;
>  			};
> +
> +			hdmi_pvi: display-bridge at 32fc4000 {
> +				compatible = "fsl,imx8mp-hdmi-pvi";
> +				reg = <0x32fc4000 0x40>;

Should be <... 0x44>, there is a register at offset 0x40.

> +				power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>;
> +				status = "disabled";
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port at 0 {
> +						reg = <0>;
> +						pvi_from_lcdif3: endpoint {
> +							remote-endpoint = <&lcdif3_to_pvi>;
> +						};
> +					};
> +
> +					port at 1 {
> +						reg = <1>;
> +						pvi_to_hdmi_tx: endpoint {
> +							remote-endpoint = <&hdmi_tx_from_pvi>;
> +						};
> +					};
> +				};
> +			};
> +
> +			lcdif3: display-controller at 32fc6000 {
> +				compatible = "fsl,imx8mp-lcdif";
> +				reg = <0x32fc6000 0x238>;

Same here: 0x238 -> 0x23c

> +				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
> +				interrupt-parent = <&irqsteer_hdmi>;
> +				clocks = <&hdmi_tx_phy>,
> +					 <&clk IMX8MP_CLK_HDMI_APB>,
> +					 <&clk IMX8MP_CLK_HDMI_ROOT>;
> +				clock-names = "pix", "axi", "disp_axi";
> +				power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_LCDIF>;
> +				status = "disabled";
> +
> +				port {
> +					lcdif3_to_pvi: endpoint {
> +						remote-endpoint = <&pvi_from_lcdif3>;
> +					};
> +				};
> +			};
> +
> +			hdmi_tx: hdmi at 32fd8000 {
> +				compatible = "fsl,imx8mp-hdmi";
> +				reg = <0x32fd8000 0x7eff>;

And here: 0x7f00, even though good sense would suggest 0x8000 I guess.

I haven't gone in more depth in reviewing this patch, but it is
definitely working so with the above fixed you can add:

 Tested-by: Luca Ceresoli <luca.ceresoli at bootlin.com>


-- 
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com